| Part Number : 24-52 | Manufacturer : Makino Inc | ||
| NSN : 3416-00-998-8922 (3416009988922) | |||
| Item Name : Lathe Engine | CAGE Code : 35377 | ||
| NIIN : 00-998-8922 (009988922) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 2452 | |||
Thank you for taking an interest in part number 24-52, that of which is listed with the description Lathe Engine; Manufactured by Makino Inc and listed alongside the NSN 3416009988922, part number 24-52 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 24-52 | Manufacturer : Makino Inc | ||
| NSN Number : 3416-00-998-8922 (3416009988922) | |||
| Item Name : Lathe Engine | CAGE Code : 35377 | ||
| NIIN : 009988922 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 24-52, that of which is listed with the description Lathe Engine; Manufactured by Makino Inc and listed alongside the NSN 3416009988922, part number 24-52 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | SLIDING GAP |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | FLOOR |
| ASHK | Electric Motor Horsepower Rating | 10.0 |
| ADQR | Center To Center Distance | 84.000 INCHES NOMINAL |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | LIGHT DUTY |
| FAAZ | Phase | THREE |
| ZZZY | Reference Number Differentiating Characteristics | BAS DIFFERENTIATED BY CENTER TO CENTER DISTANCE,DISTANCE BETWEEN OPEN CENTERS,SPINDLE SPEED RANGE IN RPM,ELEC MOTOR QUAN,ELEC MOTOR HP RATING,CURRENT TYPE,VOLTAGE IN VOLTS,FREQ IN HERTZ,AND PHASE" |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | +18.0/+720.0 |
| BTTG | Swing Over Cross Slide | 18.000 INCHES NOMINAL |
| AKSL | Purpose For Which Designed | GENERAL |
| BTWB | Thread Change Quantity | 48 |
| BTWC | Rated Swing Through Open Gap | 52.000 INCHES NOMINAL |
| BTWD | Actual Swing Through Open Gap | 52.000 INCHES NOMINAL |
| BTWF | Rated Swing Over Closed Gap | 24.000 INCHES NOMINAL |
| BTWG | Actual Swing Over Closed Gap | 26.500 INCHES NOMINAL |
| BTWJ | Distance Between Open Centers | 48.000 INCHES NOMINAL |
| BTWL | Headstock Drive Type | GEARED HEAD |
| BTWM | Headstock Center Taper Size Designator | 5 ASA STANDARD |
| BTYP | Hole Diameter Through Spindle | 2.188 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| FREQ | Frequency In Hertz | 60.0 |
| AKYD | Accessory Components And Quantity | NONE SPECIFIED |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYT | Carriage Feed Change Quantity | 48 |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +2.0/+112.0 PER INCH |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
