| Part Number : PM100 | Manufacturer : Marathon Electric Manufacturing | ||
| NSN : 6110-01-308-2272 (6110013082272) | |||
| Item Name : Regulator Voltage | CAGE Code : 38151 | ||
| NIIN : 01-308-2272 (013082272) | |||
| FSC Code : 6110 Electrical Control Equipment | |||
| FSG Code : 61 Electric Wire and Power and Distribution Equipment | |||
| INC Code : 00176 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number PM100, that of which is listed with the description Regulator Voltage; Manufactured by Marathon Electric Manufacturing and listed alongside the NSN 6110013082272, part number PM100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2001 humana press inc
CAGE Code: 34CH3 |
4 ld inc
CAGE Code: 0ACW5 |
|
357319 ontario ltd
CAGE Code: 38510 |
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
20 10 products inc
CAGE Code: 09KC9 |
|
3gen grup trafik ltd
CAGE Code: TB427 |
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
|
17 machinery llc
CAGE Code: 3FEG7 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3nity products llc
CAGE Code: 8HDM8 |
3gen corporation
CAGE Code: 3SPS3 |
|
31 mile equipment co
CAGE Code: 07PE3 |
2m machining and manufacturing
CAGE Code: 6Y604 |
|
498 msug
CAGE Code: 5VW08 |
| Part Number : PM100 | Manufacturer : Marathon Electric Manufacturing | ||
| NSN Number : 6110-01-308-2272 (6110013082272) | |||
| Item Name : Regulator Voltage | CAGE Code : 38151 | ||
| NIIN : 013082272 | |||
| FSC CODE : 6110 Electrical Control Equipment | |||
Thank you for taking an interest in part number PM100, that of which is listed with the description Regulator Voltage; Manufactured by Marathon Electric Manufacturing and listed alongside the NSN 6110013082272, part number PM100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6110-01-308-2272 Item Description: Regulator Voltage | 6110 | 013082272 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Pm100 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ANPZ | INCLOSURE FEATURE | FULLY INCLOSED |
| AEZF | CIRCUIT TYPE | PARALLEL |
| ABKW | OVERALL HEIGHT | 3.200 INCHES NOMINAL |
| AFGA | OPERATING TEMP RANGE | -40.0 TO 70.0 DEG CELSIUS |
| ANPJ | INPUT CURRENT TYPE | AC |
| ANPK | INPUT VOLTAGE RATING IN VOLTS | 150.0 MINIMUM AND 240.0 MAXIMUM |
| ANPL | INPUT FREQUENCY RATING IN HERTZ | 250.0 MINIMUM AND 300.0 MAXIMUM |
| ANPM | INPUT PHASE | SINGLE OR THREE |
| SR-5 | DESIGN CONTROL REFERENCE | C-512481 |
| SR-5 | MANUFACTURERS CODE | 38151 |
| ANPN | OUTPUT CURRENT TYPE | DC |
| ANPP | OUTPUT VOLTAGE RATING IN VOLTS | 75.0 MINIMUM AND 170.0 MAXIMUM |
| ANPQ | OUTPUT CURRENT RATING | 3.0 AMPERES MINIMUM AND 7.5 AMPERES MAXIMUM |
| ANPT | POWER RATING | 12.0 WATTS NOMINAL |
| ABMK | OVERALL WIDTH | 6.000 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | USED IN GENERATOR SWITCHBOARD ONBOARD 180 C.G. VESSELS |
| AMZD | REGULATION METHOD | ELECTRONIC |
| ANAD | ELECTRONIC DEVICE TYPE | SOLID STATE |
| ANAE | COMPENSATION PROVIDED | INDIVIDUAL DROOP |
| ANBD | REGULATION PERCENT | 0.50 |
| ANBE | RECOVERY TIME | 10.00 MILLISECONDS |
| ABHP | OVERALL LENGTH | 9.500 INCHES NOMINAL |
| ACUN | MOUNTING METHOD | UNTHREADED HOLE |
| ABTB | MOUNTING HOLE DIAMETER | 0.375 INCHES MAXIMUM |
| ABTH | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES | 4.000 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 6 |
| SR-5 | THE MANUFACTURERS DATA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
