| Part Number : 9019-6.0 | Manufacturer : Maritime Tanksystems International | ||
| NSN : 4720-01-431-1355 (4720014311355) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 0W0U5 | ||
| NIIN : 01-431-1355 (014311355) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 90196.0 | |||
Thank you for taking an interest in part number 9019-6.0, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Maritime Tanksystems International and listed alongside the NSN 4720014311355, part number 9019-6.0 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 9019-6.0 | Manufacturer : Maritime Tanksystems International | ||
| NSN Number : 4720-01-431-1355 (4720014311355) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 0W0U5 | ||
| NIIN : 014311355 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number 9019-6.0, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Maritime Tanksystems International and listed alongside the NSN 4720014311355, part number 9019-6.0 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-431-1355 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014311355 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9019-6.0 | 2 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | Inside Diameter | 1.250 INCHES NOMINAL |
| AGAV | End Item Identification | USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| ABKU | Flange Thickness | 0.405 INCHES NOMINAL 1ST END |
| ABKV | Outside Diameter | 1.960 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CQCS | Layer Composition And Location | 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | Maximum Operating Pressure | 5000.0 POUNDS PER SQUARE INCH |
| AKUT | End Flange Construction | SPLIT 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| ADJS | Exterior Color | RED |
| AKUT | End Flange Construction | SPLIT 2ND END |
| AKUU | End Connection Design | ELBOW 1ST END |
| CRDW | Hydrostatic Test Pressure | 10000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 24.000 INCHES NOMINAL OVERALL |
| ZZZK | Specification/Standard Data | SAE J517, 100R13, 81343 NATIONAL STD/SPEC |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | Connection Type | PLAIN FACE FLANGE 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 1ST END |
| AWLS | Connection Type | PLAIN FACE FLANGE 1ST END |
| ABKU | Flange Thickness | 0.495 INCHES NOMINAL 2ND END |
| AEPR | Flange Outside Diameter | 2.125 INCHES NOMINAL 1ST END |
| ACKH | Minimum Inside Bending Radius | 16.500 INCHES |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD | Burst Test Pressure | 20000.0 POUNDS PER SQUARE INCH |
| CRWL | Inside Surface Condition | SMOOTH |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 2ND END |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQCS | Layer Composition And Location | 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| AEPR | Flange Outside Diameter | 2.500 INCHES NOMINAL 2ND END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 2ND END |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| ADKX | Angle Between Rigid Elbow Fittings In Deg | 270 |
| CQCS | Layer Composition And Location | 6TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
