| Part Number : HS4142-04-10 | Manufacturer : Mcdonnell Douglas Helicopter Co Inc | ||
| NSN : 5306-01-179-0897 (5306011790897) | |||
| Item Name : Bolt Shear | CAGE Code : 02731 | ||
| NIIN : 01-179-0897 (011790897) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15903 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HS41420410 | |||
Thank you for taking an interest in part number HS4142-04-10, that of which is listed with the description Bolt Shear; Manufactured by Mcdonnell Douglas Helicopter Co Inc and listed alongside the NSN 5306011790897, part number HS4142-04-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HS4142-04-10 | Manufacturer : Mcdonnell Douglas Helicopter Co Inc | ||
| NSN Number : 5306-01-179-0897 (5306011790897) | |||
| Item Name : Bolt Shear | CAGE Code : 02731 | ||
| NIIN : 011790897 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number HS4142-04-10, that of which is listed with the description Bolt Shear; Manufactured by Mcdonnell Douglas Helicopter Co Inc and listed alongside the NSN 5306011790897, part number HS4142-04-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| CQBC | Minimum Tensile Strength | 260000 POUNDS PER SQUARE INCH |
| AATB | Width Between Flats | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| MRC | Decoded Requirement | Clear Text Reply |
| FEAT | Special Features | THREAD END CHAMFER 45 DEGREES,0.080 IN. LENGTH; 450 DEGREES F MAX APPLICATION |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| CMLP | Thread Quantity Per Inch | 16 |
| AATD | Extended Washer Thickness | 0.042 INCHES NOMINAL |
| THSD | Thread Series Designator | UNJF |
| MATT | Material | STEEL OVERALL |
| AASB | Fastener Length | 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM |
| AAWB | Shank Unthreaded Hole Diameter | 0.150 INCHES MINIMUM FIRST HOLE AND 0.190 INCHES MAXIMUM FIRST HOLE |
| CQFM | Hardness Rating | 51.0 ROCKWELL C MINIMUM OVERALL AND 54.0 ROCKWELL C MAXIMUM OVERALL |
| ANEE | Grip Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AASA | Thread Length | 0.531 INCHES NOMINAL |
| AATC | Extended Washer Diameter | 0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| AAWU | Single Shear Strength | 156000 POUNDS PER SQUARE INCH |
| AAUR | Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AASU | Head Height | 0.254 INCHES NOMINAL |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 0.233 INCHES MINIMUM FIRST HOLE AND 0.238 INCHES MAXIMUM FIRST HOLE |
| MDCL | Material Document And Classification | AMS6487E ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | Surface Treatment Document And Classification | MIL-C-8837,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASK | Head Style | DOUBLE HEXAGON W/HOLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
