| Part Number : 303-00-1000HM | Manufacturer : Meggitt International Ltd | ||
| NSN : 5905-00-883-9660 (5905008839660) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 79318 | ||
| NIIN : 00-883-9660 (008839660) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 303001000HM | |||
Thank you for taking an interest in part number 303-00-1000HM, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Meggitt International Ltd and listed alongside the NSN 5905008839660, part number 303-00-1000HM is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
498 msug
CAGE Code: 5VW08 |
3075109 canada inc
CAGE Code: L09L0 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
2 mb distribution
CAGE Code: FAH01 |
|
2056 company
CAGE Code: 7F967 |
3d
CAGE Code: 0WY47 |
|
5 11 inc
CAGE Code: 3YEL6 |
3 com/us robotics
CAGE Code: 1B8Q7 |
|
5dt inc
CAGE Code: 3BPF1 |
2kr systems llc
CAGE Code: 730Z2 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
3m alaska
CAGE Code: 0NZU5 |
|
3g shielding specialties lp
CAGE Code: 7PCU6 |
3 l filters ltd
CAGE Code: 37941 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
| Part Number : 303-00-1000HM | Manufacturer : Meggitt International Ltd | ||
| NSN Number : 5905-00-883-9660 (5905008839660) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 79318 | ||
| NIIN : 008839660 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 303-00-1000HM, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Meggitt International Ltd and listed alongside the NSN 5905008839660, part number 303-00-1000HM is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-883-9660 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008839660 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 303-00-1000HM | C | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 OHMS SINGLE SECTION |
| ABHP | III OVERALL LENGTH | 0.806 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.088 INCHES MINIMUM AND 0.092 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABKW | III OVERALL HEIGHT | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| ABXF | SHAFT LENGTH | 0.040 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | RATED AT 25 PCT POWER AT 125 DEG C |
| ADAT | BODY WIDTH | 0.275 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.766 INCHES MINIMUM AND 0.791 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABTB | MOUNTING HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.139 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| ABMK | III OVERALL WIDTH | 0.275 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 10.000 INCHES MINIMUM |
| ADAU | BODY HEIGHT | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| ADAQ | BODY LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
