| Part Number : MIL-DTL-25579 | Manufacturer : Military Specifications | ||
| NSN : 4720-01-330-0610 (4720013300610) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 81349 | ||
| NIIN : 01-330-0610 (013300610) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MILDTL25579 | |||
Thank you for taking an interest in part number MIL-DTL-25579, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Military Specifications and listed alongside the NSN 4720013300610, part number MIL-DTL-25579 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4m sigma corporation
CAGE Code: 0BC31 |
2101 llc
CAGE Code: 1GH76 |
|
10zig technology inc
CAGE Code: 49E04 |
259 holdings ltd
CAGE Code: 431P3 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
|
3m nederland b v
CAGE Code: H1248 |
3m purification inc
CAGE Code: 15472 |
|
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
360 tents l l c
CAGE Code: 4CT45 |
|
4 cs electronic packaging inc
CAGE Code: 60744 |
1 nci j bkm mrk k ligi
CAGE Code: T0790 |
|
320 matlogpel breda centrale
CAGE Code: H2851 |
2056 company
CAGE Code: 7F967 |
|
3nity products llc
CAGE Code: 8HDM8 |
| Part Number : MIL-DTL-25579 | Manufacturer : Military Specifications | ||
| NSN Number : 4720-01-330-0610 (4720013300610) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 81349 | ||
| NIIN : 013300610 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number MIL-DTL-25579, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Military Specifications and listed alongside the NSN 4720013300610, part number MIL-DTL-25579 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-330-0610 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013300610 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS8005E400AA | 2 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| ABKV | OUTSIDE DIAMETER | 0.343 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CRXX | MEASURING METHOD AND LENGTH | 40.000 INCHES NOMINAL OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AGAV | END ITEM IDENTIFICATION | GENERAL MOTORS CORP GENERATOR SET MODEL 501K |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS8005 GOVERNMENT STANDARD |
| AARX | INSIDE DIAMETER | 0.312 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
