| Part Number : MS21153-7 | Manufacturer : Military Standards Corp | ||
| NSN : 3110-00-232-3251 (3110002323251) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 96906 | ||
| NIIN : 00-232-3251 (002323251) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS211537 | |||
Thank you for taking an interest in part number MS21153-7, that of which is listed with the description Bearing Ball Rod End; Manufactured by Military Standards Corp and listed alongside the NSN 3110002323251, part number MS21153-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
43 apple hill llc
CAGE Code: 6AKU8 |
5dt inc
CAGE Code: 3BPF1 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
25 canadian forces supply depot
CAGE Code: 35637 |
|
3m alaska
CAGE Code: 0NZU5 |
28eme groupe geographique
CAGE Code: FAR17 |
|
20th century spring mfg
CAGE Code: 0PZE8 |
101communications inc
CAGE Code: 1WS16 |
|
5 11 tactical inc
CAGE Code: 3P4J9 |
3s group inc
CAGE Code: 07CN0 |
|
2101 llc
CAGE Code: 1GH76 |
17th st photo supply inc
CAGE Code: 1VV61 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
3m italia spa
CAGE Code: A3445 |
|
21st century optics inc
CAGE Code: 0TN38 |
| Part Number : MS21153-7 | Manufacturer : Military Standards Corp | ||
| NSN Number : 3110-00-232-3251 (3110002323251) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 96906 | ||
| NIIN : 002323251 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number MS21153-7, that of which is listed with the description Bearing Ball Rod End; Manufactured by Military Standards Corp and listed alongside the NSN 3110002323251, part number MS21153-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-232-3251 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 002323251 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21153-7 | 6 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZE | SHANK DIAMETER | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| AAZF | SHANK STYLE | INTERNALLY THREADED W/HEXAGON END |
| ABHP | OVERALL LENGTH | 1.9180 INCHES MINIMUM AND 1.9580 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.4590 INCHES MINIMUM AND 1.4790 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| ASDB | WIDTH ACROSS FLATS | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP 4130 OUTER RING |
| MATT | MATERIAL | STEEL COMP 4130 SHAFT |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
