| Part Number : 995-51022-9900 | Manufacturer : Military Standards Corp | ||
| NSN : 3110-00-293-8370 (3110002938370) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 96906 | ||
| NIIN : 00-293-8370 (002938370) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 995510229900 | |||
Thank you for taking an interest in part number 995-51022-9900, that of which is listed with the description Bearing Ball Rod End; Manufactured by Military Standards Corp and listed alongside the NSN 3110002938370, part number 995-51022-9900 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 995-51022-9900 | Manufacturer : Military Standards Corp | ||
| NSN Number : 3110-00-293-8370 (3110002938370) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 96906 | ||
| NIIN : 002938370 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 995-51022-9900, that of which is listed with the description Bearing Ball Rod End; Manufactured by Military Standards Corp and listed alongside the NSN 3110002938370, part number 995-51022-9900 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-293-8370 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 002938370 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CV15-408602 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.3730 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AAZF | SHANK STYLE | SOLID |
| ABHP | OVERALL LENGTH | 2.4800 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.1900 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.0400 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.3820 INCHES MINIMUM AND 0.3920 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.5000 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.9600 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | TWO HOLES THRU SHANK SPACED 90 DEG APART,ONE HOLE 0.3000 IN. FORM END OF SHANK,OTHER HOLE 0.6000 IN. FORM END OF SHANK,SELECTED,CLASSIFIED AND TESTED BY ASSEMBLY MFR AT HIS PLANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | ALUMINUM ALLOY ROD END BODY |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
