| Part Number : MS21438-104 | Manufacturer : Military Standards Corp | ||
| NSN : 3110-01-208-5389 (3110012085389) | |||
| Item Name : Bearing Roller Needle | CAGE Code : 96906 | ||
| NIIN : 01-208-5389 (012085389) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00051 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MS21438104 | |||
Thank you for taking an interest in part number MS21438-104, that of which is listed with the description Bearing Roller Needle; Manufactured by Military Standards Corp and listed alongside the NSN 3110012085389, part number MS21438-104 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3d pep
CAGE Code: FB830 |
25 canadian forces supply depot
CAGE Code: 35637 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
10zig technology inc
CAGE Code: 49E04 |
|
360 tents l l c
CAGE Code: 4CT45 |
3 ring inc
CAGE Code: 68310 |
|
357319 ontario ltd
CAGE Code: 38510 |
2kr systems llc
CAGE Code: 730Z2 |
|
4m sigma corporation
CAGE Code: 0BC31 |
3m co health care services sales
CAGE Code: 0Z2D0 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
4fastplumber llc
CAGE Code: 4P0W6 |
|
2001 micro systemation ab
CAGE Code: SK396 |
2mb international
CAGE Code: FA7N3 |
|
3dfx interactive
CAGE Code: KA796 |
| Part Number : MS21438-104 | Manufacturer : Military Standards Corp | ||
| NSN Number : 3110-01-208-5389 (3110012085389) | |||
| Item Name : Bearing Roller Needle | CAGE Code : 96906 | ||
| NIIN : 012085389 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number MS21438-104, that of which is listed with the description Bearing Roller Needle; Manufactured by Military Standards Corp and listed alongside the NSN 3110012085389, part number MS21438-104 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-208-5389 Item PartTypeName: BEARING,ROLLER,NEEDLE | 3110 | 012085389 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21438-104 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.2493 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) |
| AGVT | OUTER RING WIDTH | 0.3300 INCHES MINIMUM AND 0.3450 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AGWG | CROWN RADIUS | 10.0000 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| CBBL | FEATURES PROVIDED | LUBRICATION HOLE AND LUBRICATION GROOVE |
| FEAT | SPECIAL FEATURES | PLATING ON EXPOSED SURFACES AS MOUNTED; OPTIONAL OIL GROOVE IN ID OF OUTER RING |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC ACETAL OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL |
| MATT | MATERIAL | STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 RETAINING PLATE |
| MATT | MATERIAL | STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES RETAINING PLATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-392 FED SPEC 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 2ND MATERIAL RESPONSE SEAL |
| SFTT | SURFACE TREATMENT | CADMIUM OR OXIDE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OR OXIDE RETAINING PLATE |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE INNER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE RETAINING PLATE |
| STYL | STYLE DESIGNATOR | TRACK ROLLER |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS21438 GOVERNMENT STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
