| Part Number : MS21438-108 | Manufacturer : Military Standards Corp | ||
| NSN : 3110-01-256-9277 (3110012569277) | |||
| Item Name : Bearing Roller Need | CAGE Code : 96906 | ||
| NIIN : 01-256-9277 (012569277) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00051 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MS21438108 | |||
Thank you for taking an interest in part number MS21438-108, that of which is listed with the description Bearing Roller Need; Manufactured by Military Standards Corp and listed alongside the NSN 3110012569277, part number MS21438-108 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS21438-108 | Manufacturer : Military Standards Corp | ||
| NSN Number : 3110-01-256-9277 (3110012569277) | |||
| Item Name : Bearing Roller Need | CAGE Code : 96906 | ||
| NIIN : 012569277 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number MS21438-108, that of which is listed with the description Bearing Roller Need; Manufactured by Military Standards Corp and listed alongside the NSN 3110012569277, part number MS21438-108 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-256-9277 Item PartTypeName: BEARING,ROLLER,NEEDLE | 3110 | 012569277 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-B-3990 | 5 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.4993 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.3115 INCHES MINIMUM AND 1.3135 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.4850 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AGWG | CROWN RADIUS | 10.0000 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | EXTERNAL |
| CBBL | FEATURES PROVIDED | LUBRICATION HOLE AND LUBRICATION GROOVE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC ACETAL OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL |
| MATT | MATERIAL | STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 INNER RING |
| MATT | MATERIAL | STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OUTER RING |
| MATT | MATERIAL | STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 RETAINING PLATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-392 FED SPEC 1ST MATERIAL RESPONSE OR L-P-410,TY 6/6 FED SPEC 2ND MATERIAL RESPONSE SEAL |
| SFTT | SURFACE TREATMENT | CADMIUM OR OXIDE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OR OXIDE RETAINING PLATE |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE INNER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE RETAINING PLATE |
| STYL | STYLE DESIGNATOR | TRACK ROLLER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
