| Part Number : MS51861-14C | Manufacturer : Military Standards Corp | ||
| NSN : 5305-00-163-6561 (5305001636561) | |||
| Item Name : Screw Tapping | CAGE Code : 96906 | ||
| NIIN : 00-163-6561 (001636561) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 41756 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS5186114C | |||
Thank you for taking an interest in part number MS51861-14C, that of which is listed with the description Screw Tapping; Manufactured by Military Standards Corp and listed alongside the NSN 5305001636561, part number MS51861-14C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS51861-14C | Manufacturer : Military Standards Corp | ||
| NSN Number : 5305-00-163-6561 (5305001636561) | |||
| Item Name : Screw Tapping | CAGE Code : 96906 | ||
| NIIN : 001636561 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS51861-14C, that of which is listed with the description Screw Tapping; Manufactured by Military Standards Corp and listed alongside the NSN 5305001636561, part number MS51861-14C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-163-6561 Item PartTypeName: SCREW,TAPPING | 5305 | 001636561 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS24622-10 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AASK | HEAD STYLE | PAN |
| AASL | HEAD DIAMETER | 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AGAV | END ITEM IDENTIFICATION | W/S: WASP CLASS LHD; AIRCRAFT,PROWLER EA-6B; AIRCRAFT,B-2 BOMBER (ATB); NIMITZ CLASS CVN; EMORY S. LAND CLASS AS; GENERAL PURPOSE ELECTRONIC TEST EQUIPMENT GPETE; LANDING CRAFT AIR CUSHION (LCAC); FMS-KNOW CLASS FF; FORRESTAL CLASS CV; SU |
| CRGF | NONMACHINE THREAD STYLE | GIMLET POINT (TYPE A,AB OR BA) |
| CTYF | NONMACHINE NOMINAL THREAD DIAMETER | 0.112 INCHES |
| MATT | MATERIAL | STEEL COMP 410 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | AB TYPE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
