| Part Number : MS3369B524 | Manufacturer : Military Standards Corp | ||
| NSN : 5305-01-026-5106 (5305010265106) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 96906 | ||
| NIIN : 01-026-5106 (010265106) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MS3369B524, that of which is listed with the description Screw Close Tolerance; Manufactured by Military Standards Corp and listed alongside the NSN 5305010265106, part number MS3369B524 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS3369B524 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5305-01-026-5106 (5305010265106) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 96906 | ||
| NIIN : 010265106 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS3369B524, that of which is listed with the description Screw Close Tolerance; Manufactured by Military Standards Corp and listed alongside the NSN 5305010265106, part number MS3369B524 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-026-5106 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010265106 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CA2658-5-24 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.306 INCHES MINIMUM AND 0.357 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.978 INCHES MINIMUM AND 1.998 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AASU | HEAD HEIGHT | 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| AAUM | LOCKING FEATURE | DETENT BALL GRIP |
| AAUR | GRIP DIAMETER | 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 1.500 INCHES MINIMUM AND 1.516 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | 0.492 DEGREES MINIMUM AND 0.502 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.865 INCHES MINIMUM FIRST HOLE AND 1.885 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
