| Part Number : MS21125B426 | Manufacturer : Military Standards Corp | ||
| NSN : 5305-01-197-3987 (5305011973987) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 96906 | ||
| NIIN : 01-197-3987 (011973987) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MS21125B426, that of which is listed with the description Screw Close Tolerance; Manufactured by Military Standards Corp and listed alongside the NSN 5305011973987, part number MS21125B426 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS21125B426 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5305-01-197-3987 (5305011973987) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 96906 | ||
| NIIN : 011973987 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS21125B426, that of which is listed with the description Screw Close Tolerance; Manufactured by Military Standards Corp and listed alongside the NSN 5305011973987, part number MS21125B426 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-197-3987 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011973987 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NASM21125B426 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.043 INCHES MINIMUM AND 2.063 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AAUM | LOCKING FEATURE | DETENT BALL GRIP |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 1.625 INCHES MINIMUM AND 1.641 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 63000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.948 INCHES MINIMUM FIRST HOLE AND 1.968 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP 631 SPRING OR STEEL COMP 302 SPRING |
| MATT | MATERIAL | STEEL COMP 632 FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5673 ASSN STD 1ST MATERIAL RESPONSE SPRING OR ASTM A580 ASSN STD 2ND MATERIAL RESPONSE SPRING |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
