| Part Number : MS3369B307 | Manufacturer : Military Standards Corp | ||
| NSN : 5305-01-338-6795 (5305013386795) | |||
| Item Name : Screw,Close Tolerance | CAGE Code : 96906 | ||
| NIIN : 01-338-6795 (013386795) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MS3369B307, that of which is listed with the description Screw,Close Tolerance; Manufactured by Military Standards Corp and listed alongside the NSN 5305013386795, part number MS3369B307 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS3369B307 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5305-01-338-6795 (5305013386795) | |||
| Item Name : Screw,Close Tolerance | CAGE Code : 96906 | ||
| NIIN : 013386795 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS3369B307, that of which is listed with the description Screw,Close Tolerance; Manufactured by Military Standards Corp and listed alongside the NSN 5305013386795, part number MS3369B307 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-338-6795 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013386795 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS3369B307 | 5 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.262 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASB | FASTENER LENGTH | 0.810 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AAUR | GRIP DIAMETER | 0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 63000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.731 INCHES NOMINAL FIRST HOLE |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASU | HEAD HEIGHT | 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.413 INCHES MINIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| ANEE | GRIP LENGTH | 0.438 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
