| Part Number : MS27576-8-37 | Manufacturer : Military Standards Corp | ||
| NSN : 5306-01-300-2931 (5306013002931) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 96906 | ||
| NIIN : 01-300-2931 (013002931) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MS27576837 | |||
Thank you for taking an interest in part number MS27576-8-37, that of which is listed with the description Bolt Close Tolerance; Manufactured by Military Standards Corp and listed alongside the NSN 5306013002931, part number MS27576-8-37 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS27576-8-37 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5306-01-300-2931 (5306013002931) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 96906 | ||
| NIIN : 013002931 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number MS27576-8-37, that of which is listed with the description Bolt Close Tolerance; Manufactured by Military Standards Corp and listed alongside the NSN 5306013002931, part number MS27576-8-37 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-300-2931 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 013002931 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS27576-8-37 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.4982 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| MATT | MATERIAL | STEEL COMP E4340 FASTENER OR STEEL COMP 4140 FASTENER OR STEEL COMP 8740 FASTENER OR STEEL COMP 4130 FASTENER OR STEEL COMP 6150 FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| AASB | FASTENER LENGTH | 2.958 INCHES MINIMUM AND 2.978 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 2.312 INCHES MINIMUM AND 2.328 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.401 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AASU | HEAD HEIGHT | 0.251 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| CQBC | MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP 630 STAND-OFF OR STEEL COMP 631 STAND-OFF OR STEEL COMP 440C STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD 1ST MATERIAL RESPONSE STAND-OFF OR AMS5644 ASSN STD 2ND MATERIAL RESPONSE STAND-OFF OR QQ-S-763 CL440C FED SPEC 3RD MATERIAL RESPONSE STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE FASTENER OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER OR MIL-S-6758 MIL SPEC 4TH MATERIAL RESPONSE FASTENER OR MIL-S-8503 MIL SPEC 5TH |
| SFTT | SURFACE TREATMENT | CADMIUM FASTENER OR CHROMATE FASTENER |
| SFTT | SURFACE TREATMENT | PASSIVATE STAND-OFF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| AAUM | LOCKING FEATURE | RETAINER GRIP |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.848 INCHES MINIMUM FIRST HOLE AND 2.858 INCHES MAXIMUM FIRST HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
