| Part Number : MS9482-11 | Manufacturer : Military Standards Corp | ||
| NSN : 5310-00-470-2940 (5310004702940) | |||
| Item Name : Washer,Recessed | CAGE Code : 96906 | ||
| NIIN : 00-470-2940 (004702940) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15933 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS948211 | |||
Thank you for taking an interest in part number MS9482-11, that of which is listed with the description Washer,Recessed; Manufactured by Military Standards Corp and listed alongside the NSN 5310004702940, part number MS9482-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS9482-11 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5310-00-470-2940 (5310004702940) | |||
| Item Name : Washer,Recessed | CAGE Code : 96906 | ||
| NIIN : 004702940 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number MS9482-11, that of which is listed with the description Washer,Recessed; Manufactured by Military Standards Corp and listed alongside the NSN 5310004702940, part number MS9482-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-470-2940 Item PartTypeName: WASHER,RECESSED | 5310 | 004702940 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS9482-11 | 2 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.317 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM |
| CQJW | TOP RECESS DIAMETER | 0.394 INCHES NOMINAL |
| CRKG | BOTTOM RECESS ANGLE | 100.0 DEGREES NOMINAL |
| CRSD | TOP RECESS ANGLE | 80.0 DEGREES NOMINAL |
| CSML | BOTTOM RECESS DIAMETER | 0.404 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BOTTOM |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES TOP |
| HEAT | HEAT TREATMENT | QUENCHED AND TEMPERED |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6437 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL OR CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | RECESSED BOTH SIDES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
