| Part Number : MS9100-05 | Manufacturer : Military Standards Corp | ||
| NSN : 5310-00-943-2133 (5310009432133) | |||
| Item Name : Nut,Plain,Hexagon | CAGE Code : 96906 | ||
| NIIN : 00-943-2133 (009432133) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS910005 | |||
Thank you for taking an interest in part number MS9100-05, that of which is listed with the description Nut,Plain,Hexagon; Manufactured by Military Standards Corp and listed alongside the NSN 5310009432133, part number MS9100-05 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
184th air refueling wing
CAGE Code: 3EP27 |
101communications inc
CAGE Code: 1WS16 |
|
24 hour distributors
CAGE Code: 12136,3WKM0 |
360 tents l l c
CAGE Code: 4CT45 |
|
5dt inc
CAGE Code: 3BPF1 |
3m belgium nv
CAGE Code: B2281 |
|
1spatial ltd
CAGE Code: U3518 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
526th emxs fabrication
CAGE Code: 69XG4 |
|
3 com/us robotics
CAGE Code: 1B8Q7 |
4 ld inc
CAGE Code: 0ACW5 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
3 m federal systems dept
CAGE Code: 68352 |
| Part Number : MS9100-05 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5310-00-943-2133 (5310009432133) | |||
| Item Name : Nut,Plain,Hexagon | CAGE Code : 96906 | ||
| NIIN : 009432133 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number MS9100-05, that of which is listed with the description Nut,Plain,Hexagon; Manufactured by Military Standards Corp and listed alongside the NSN 5310009432133, part number MS9100-05 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-943-2133 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 009432133 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS9100-05 | 5 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.055 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 105.0 DEGREES MINIMUM NUT AND 115.0 DEGREES MAXIMUM NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| MATT | MATERIAL | STEEL COMP 304 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5634 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
