| Part Number : MS20426AD4-22 | Manufacturer : Military Standards Corp | ||
| NSN : 5320-00-117-6961 (5320001176961) | |||
| Item Name : Rivet Solid | CAGE Code : 96906 | ||
| NIIN : 00-117-6961 (001176961) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00861 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS20426AD422 | |||
Thank you for taking an interest in part number MS20426AD4-22, that of which is listed with the description Rivet Solid; Manufactured by Military Standards Corp and listed alongside the NSN 5320001176961, part number MS20426AD4-22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
451676 ontario ltd
CAGE Code: 38552 |
3m purification inc
CAGE Code: 15472 |
|
25 canadian forces supply depot
CAGE Code: 35637 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
394 test maintenance squadron sac
CAGE Code: 33044 |
12 volt shop
CAGE Code: Z0JM2 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
3m aerospace
CAGE Code: R0844 |
|
3d energy pty ltd
CAGE Code: Z0UA3 |
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
|
400hz repair
CAGE Code: 03MS6 |
2eme regiment du materiel
CAGE Code: FARD5 |
|
2001 humana press inc
CAGE Code: 34CH3 |
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
|
3m health care service center
CAGE Code: 0UTW7 |
| Part Number : MS20426AD4-22 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5320-00-117-6961 (5320001176961) | |||
| Item Name : Rivet Solid | CAGE Code : 96906 | ||
| NIIN : 001176961 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number MS20426AD4-22, that of which is listed with the description Rivet Solid; Manufactured by Military Standards Corp and listed alongside the NSN 5320001176961, part number MS20426AD4-22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-117-6961 Item PartTypeName: RIVET,SOLID | 5320 | 001176961 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS2042GAS4-22 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AAZF | SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| AAZG | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.177 NOMINAL MILS AND 1.197 NOMINAL CENTIMETERS |
| CQSX | SHEAR STRENGTH | 26000 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2117 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL OR OXIDE FILM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
