| Part Number : MS9165 | Manufacturer : Military Standards Corp | ||
| NSN : 5340-00-880-6597 (5340008806597) | |||
| Item Name : Bracket,Angle | CAGE Code : 96906 | ||
| NIIN : 00-880-6597 (008806597) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MS9165, that of which is listed with the description Bracket,Angle; Manufactured by Military Standards Corp and listed alongside the NSN 5340008806597, part number MS9165 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS9165 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5340-00-880-6597 (5340008806597) | |||
| Item Name : Bracket,Angle | CAGE Code : 96906 | ||
| NIIN : 008806597 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number MS9165, that of which is listed with the description Bracket,Angle; Manufactured by Military Standards Corp and listed alongside the NSN 5340008806597, part number MS9165 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-880-6597 Item PartTypeName: BRACKET,ANGLE | 5340 | 008806597 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS9165-04 | 2 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHLZ | SECOND LEG SLOT LENGTH | 0.278 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| AHMA | SECOND LEG SLOT WIDTH | 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AJFP | FIRST LEG END RADIUS | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AJFQ | SECOND LEG END RADIUS | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
| ADLK | FIRST LEG LENGTH | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHLL | FIRST LEG SLOT LENGTH | 0.278 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| AHLM | FIRST LEG SLOT WIDTH | 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
