| Part Number : MS21919WCF22 | Manufacturer : Military Standards Corp | ||
| NSN : 5340-01-236-4457 (5340012364457) | |||
| Item Name : Clamp,Loop | CAGE Code : 96906 | ||
| NIIN : 01-236-4457 (012364457) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MS21919WCF22, that of which is listed with the description Clamp,Loop; Manufactured by Military Standards Corp and listed alongside the NSN 5340012364457, part number MS21919WCF22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS21919WCF22 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5340-01-236-4457 (5340012364457) | |||
| Item Name : Clamp,Loop | CAGE Code : 96906 | ||
| NIIN : 012364457 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number MS21919WCF22, that of which is listed with the description Clamp,Loop; Manufactured by Military Standards Corp and listed alongside the NSN 5340012364457, part number MS21919WCF22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-236-4457 Item PartTypeName: CLAMP,LOOP | 5340 | 012364457 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21919WCF22 | 5 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT |
| ABMK | OVERALL WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.032 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.343 INCHES MINIMUM AND 1.403 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHION |
| MATT | MATERIAL | STEEL COMP 321 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
