| Part Number : 160D725151-11 | Manufacturer : Miller Stuart Inc | ||
| NSN : 5305-01-016-2924 (5305010162924) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 52977 | ||
| NIIN : 01-016-2924 (010162924) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 160D72515111 | |||
Thank you for taking an interest in part number 160D725151-11, that of which is listed with the description Screw Close Tolerance; Manufactured by Miller Stuart Inc and listed alongside the NSN 5305010162924, part number 160D725151-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 160D725151-11 | Manufacturer : Miller Stuart Inc | ||
| NSN Number : 5305-01-016-2924 (5305010162924) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 52977 | ||
| NIIN : 010162924 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 160D725151-11, that of which is listed with the description Screw Close Tolerance; Manufactured by Miller Stuart Inc and listed alongside the NSN 5305010162924, part number 160D725151-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-016-2924 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010162924 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 162D725151-2001 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| SR-5 | DESIGN CONTROL REFERENCE | 160D725151-11 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 2.933 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.933 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.124 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE |
| SR-5 | MANUFACTURERS CODE | 26512 |
| MATT | MATERIAL | STEEL COMP 4340 OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 COND D MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ANEE | GRIP LENGTH | 2.395 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.538 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.143 INCHES NOMINAL FIRST HOLE |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| SR-5 | THE MANUFACTURERS DATA | |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CQBC | MINIMUM TENSILE STRENGTH | 200000 POUNDS PER SQUARE INCH |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
