| Part Number : SA1507A1 3-16 | Manufacturer : Mkt Geotechnical Systems | ||
| NSN : 3130-00-107-8763 (3130001078763) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 20263 | ||
| NIIN : 00-107-8763 (001078763) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: SA1507A1316 | |||
Thank you for taking an interest in part number SA1507A1 3-16, that of which is listed with the description Bearing Unit Ball; Manufactured by Mkt Geotechnical Systems and listed alongside the NSN 3130001078763, part number SA1507A1 3-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SA1507A1 3-16 | Manufacturer : Mkt Geotechnical Systems | ||
| NSN Number : 3130-00-107-8763 (3130001078763) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 20263 | ||
| NIIN : 001078763 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number SA1507A1 3-16, that of which is listed with the description Bearing Unit Ball; Manufactured by Mkt Geotechnical Systems and listed alongside the NSN 3130001078763, part number SA1507A1 3-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-107-8763 Item PartTypeName: BEARING UNIT,BALL | 3130 | 001078763 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SA1507A1 3-16FIXED | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.5312 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 0.7500 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.1875 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.8125 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 5.6250 INCHES MINIMUM AND 6.1250 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 3.8125 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 3.2500 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 7.5000 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | 2.0000 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 3.8125 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.0000 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 60.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | OIL |
| MATT | MATERIAL | IRON CAST HOUSING |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,OPTIONAL SPLIT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
