| Part Number : LTH-11-H-3 | Manufacturer : Moog Inc | ||
| NSN : 5990-00-717-5116 (5990007175116) | |||
| Item Name : Resolver Electrical Linear | CAGE Code : 99932 | ||
| NIIN : 00-717-5116 (007175116) | |||
| FSC Code : 5990 Synchros and Resolvers | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 31780 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: LTH11H3 | |||
Thank you for taking an interest in part number LTH-11-H-3, that of which is listed with the description Resolver Electrical Linear; Manufactured by Moog Inc and listed alongside the NSN 5990007175116, part number LTH-11-H-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : LTH-11-H-3 | Manufacturer : Moog Inc | ||
| NSN Number : 5990-00-717-5116 (5990007175116) | |||
| Item Name : Resolver Electrical Linear | CAGE Code : 99932 | ||
| NIIN : 007175116 | |||
| FSC CODE : 5990 Synchros and Resolvers | |||
Thank you for taking an interest in part number LTH-11-H-3, that of which is listed with the description Resolver Electrical Linear; Manufactured by Moog Inc and listed alongside the NSN 5990007175116, part number LTH-11-H-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-717-5116 Item PartTypeName: RESOLVER,ELECTRICAL,LINEAR | 5990 | 007175116 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1047255 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVH | SHOULDER DIAMETER | 1.0000 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0810 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 101.0 ALLQJAA3.500 FINISHED-CHAMFERED |
| AJSY | ZSO RESISTANCE IN OHMS | 68.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 2.800 INPUT TO OUTPUT NOMINAL |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 16300.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 127.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVL | PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.1930 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 ROTOR,1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 7.0 MILLIAMPERES NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 2060.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 820.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 62.00 NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVP | MAXIMUM LINEAR RANGE IN DEG | -50.0/50.0 |
| AJVQ | LINEARITY IN PERCENT | 0.50 |
| AJVR | OUTPUT VOLTAGE CHANGE PER DEG IN VOLTS | 0.332 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| AJWH | SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0620 NOMINAL INCHES |
| AJWR | SHOULDER LENGTH | 0.0620 NOMINAL INCHES |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.685 ROTOR TO STATOR NOMINAL |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
