| Part Number : 44Q1236-D0 | Manufacturer : Morris Material Handling Inc | ||
| NSN : 4720-01-366-5553 (4720013665553) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 27315 | ||
| NIIN : 01-366-5553 (013665553) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 44Q1236D0 | |||
Thank you for taking an interest in part number 44Q1236-D0, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Morris Material Handling Inc and listed alongside the NSN 4720013665553, part number 44Q1236-D0 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 l filters ltd
CAGE Code: 37941 |
1064100 alberta ltd
CAGE Code: L0C80 |
|
3m france
CAGE Code: F0347 |
3dfx interactive
CAGE Code: KA796 |
|
2 mb distribution
CAGE Code: FAH01 |
320 matlogpel breda centrale
CAGE Code: H2851 |
|
24 hour distributors
CAGE Code: 12136,3WKM0 |
14 dock drive inc
CAGE Code: 14677 |
|
2709th af vehicle control group
CAGE Code: 10994 |
1st team installations llc
CAGE Code: 3FSE9 |
|
3gen corporation
CAGE Code: 3SPS3 |
3ps inc
CAGE Code: 1MHK2 |
|
5605 n illinois inc
CAGE Code: 089F4 |
3m co admininistrative electronic
CAGE Code: 20999 |
|
1 nci j bkm mrk k ligi
CAGE Code: T0790 |
| Part Number : 44Q1236-D0 | Manufacturer : Morris Material Handling Inc | ||
| NSN Number : 4720-01-366-5553 (4720013665553) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 27315 | ||
| NIIN : 013665553 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number 44Q1236-D0, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Morris Material Handling Inc and listed alongside the NSN 4720013665553, part number 44Q1236-D0 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-366-5553 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013665553 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 44Q1236-D0 | 2 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UN 2ND END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.080 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 22.500 INCHES NOMINAL OVERALL |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| AGAV | END ITEM IDENTIFICATION | 3810-01-268-1737,TRUCK MOUNTED CRANE |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| FEAT | SPECIAL FEATURES | CRIMPED FITTINGS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
