| Part Number : 0620V023 | Manufacturer : Morris Material Handling Inc | ||
| NSN : 5305-00-900-4614 (5305009004614) | |||
| Item Name : Screw Cap Socket Head | CAGE Code : 27315 | ||
| NIIN : 00-900-4614 (009004614) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16282 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 0620V023, that of which is listed with the description Screw Cap Socket Head; Manufactured by Morris Material Handling Inc and listed alongside the NSN 5305009004614, part number 0620V023 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 0620V023 | Manufacturer : Morris Material Handling Inc | ||
| NSN Number : 5305-00-900-4614 (5305009004614) | |||
| Item Name : Screw Cap Socket Head | CAGE Code : 27315 | ||
| NIIN : 009004614 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 0620V023, that of which is listed with the description Screw Cap Socket Head; Manufactured by Morris Material Handling Inc and listed alongside the NSN 5305009004614, part number 0620V023 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-900-4614 Item PartTypeName: SCREW,CAP,SOCKET HEAD | 5305 | 009004614 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 0620V023 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.750 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.750 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AGAV | END ITEM IDENTIFICATION | JOINT EXPEDITIONARY COLLECTIVE PROTECTION (JECP) TENT |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
