| Part Number : MFC-24C | Manufacturer : Morse Industrial Corp | ||
| NSN : 3130-00-227-4182 (3130002274182) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 02695 | ||
| NIIN : 00-227-4182 (002274182) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MFC24C | |||
Thank you for taking an interest in part number MFC-24C, that of which is listed with the description Bearing Unit Ball; Manufactured by Morse Industrial Corp and listed alongside the NSN 3130002274182, part number MFC-24C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MFC-24C | Manufacturer : Morse Industrial Corp | ||
| NSN Number : 3130-00-227-4182 (3130002274182) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 02695 | ||
| NIIN : 002274182 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number MFC-24C, that of which is listed with the description Bearing Unit Ball; Manufactured by Morse Industrial Corp and listed alongside the NSN 3130002274182, part number MFC-24C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-227-4182 Item PartTypeName: BEARING UNIT,BALL | 3130 | 002274182 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MFC24 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVL | PILOT DIAMETER | 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| ABKG | BOLT CIRCLE DIAMETER | 4.3750 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.4375 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.5000 INCHES NOMINAL |
| AFWB | HOUSING DIAMETER | 5.2500 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 1.4688 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.9375 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| FEAT | SPECIAL FEATURES | ROUND MTG HOLES |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL SEAL AND WOOL SEAL |
| STYL | STYLE DESIGNATOR | FLANGE CARTRIDGE BLOCK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
