| Part Number : MFC-23 | Manufacturer : Morse Industrial Corp | ||
| NSN : 3130-01-020-5358 (3130010205358) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 02695 | ||
| NIIN : 01-020-5358 (010205358) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MFC23 | |||
Thank you for taking an interest in part number MFC-23, that of which is listed with the description Bearing Unit Ball; Manufactured by Morse Industrial Corp and listed alongside the NSN 3130010205358, part number MFC-23 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MFC-23 | Manufacturer : Morse Industrial Corp | ||
| NSN Number : 3130-01-020-5358 (3130010205358) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 02695 | ||
| NIIN : 010205358 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number MFC-23, that of which is listed with the description Bearing Unit Ball; Manufactured by Morse Industrial Corp and listed alongside the NSN 3130010205358, part number MFC-23 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-020-5358 Item PartTypeName: BEARING UNIT,BALL | 3130 | 010205358 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MFC-23 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVL | PILOT DIAMETER | 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| ABKG | BOLT CIRCLE DIAMETER | 4.3750 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.4375 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.4375 INCHES MINIMUM AND 1.4380 INCHES MAXIMUM |
| AFWB | HOUSING DIAMETER | 5.2500 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 1.4688 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.9375 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | WOOL SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| STYL | STYLE DESIGNATOR | FLANGE CARTRIDGE BLOCK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
