| Part Number : A722-802 | Manufacturer : Mpb Corporation | ||
| NSN : 3110-01-088-2023 (3110010882023) | |||
| Item Name : Bearing Ball Thrust | CAGE Code : 40920 | ||
| NIIN : 01-088-2023 (010882023) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00019 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: A722802 | |||
Thank you for taking an interest in part number A722-802, that of which is listed with the description Bearing Ball Thrust; Manufactured by Mpb Corporation and listed alongside the NSN 3110010882023, part number A722-802 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A722-802 | Manufacturer : Mpb Corporation | ||
| NSN Number : 3110-01-088-2023 (3110010882023) | |||
| Item Name : Bearing Ball Thrust | CAGE Code : 40920 | ||
| NIIN : 010882023 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number A722-802, that of which is listed with the description Bearing Ball Thrust; Manufactured by Mpb Corporation and listed alongside the NSN 3110010882023, part number A722-802 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-088-2023 Item PartTypeName: BEARING,BALL,THRUST | 3110 | 010882023 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 599242-3 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKW | OVERALL HEIGHT | 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.3085 INCHES MINIMUM AND 0.3105 INCHES MAXIMUM |
| AGWJ | BORE SMALLEST DIAMETER | 0.1270 INCHES NOMINAL |
| AGWK | LARGEST BORE DIAMETER | 0.1290 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZQ | THRUST DIRECTIONAL CAPABILITY DESIGNATION | SINGLE |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| FEAT | SPECIAL FEATURES | RING AND BALLS C56.0 TO C64.0 ROCKWELL HARDNESS |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MATT | MATERIAL | STEEL COMP 630 RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MS 5643 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| STYL | STYLE DESIGNATOR | GROOVED RACE SURFACE |
| TEST | TEST DATA DOCUMENT | 73030-599242-3 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
