| Part Number : T543 | Manufacturer : Mpb Corporation | ||
| NSN : 3110-01-191-3230 (3110011913230) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 40920 | ||
| NIIN : 01-191-3230 (011913230) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number T543, that of which is listed with the description Bearing Ball Duplex; Manufactured by Mpb Corporation and listed alongside the NSN 3110011913230, part number T543 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : T543 | Manufacturer : Mpb Corporation | ||
| NSN Number : 3110-01-191-3230 (3110011913230) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 40920 | ||
| NIIN : 011913230 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number T543, that of which is listed with the description Bearing Ball Duplex; Manufactured by Mpb Corporation and listed alongside the NSN 3110011913230, part number T543 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-191-3230 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011913230 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 13527201 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.6040 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 3.0622 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 3.8746 INCHES MINIMUM AND 3.8750 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 5T |
| CTHQ | BEARING PRELOAD RATING | 90.0 POUNDS MINIMUM AND 110.0 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | VACUUM IMPREGNATE RETAINER WITH SPECIFIED OIL,CENTRIFUGE FOR 2 MINUTES AT 100 G AFTER VACUUM; INSCRIBE MATCH MARK ON OD OF EACH BEARING; ONE SHIELD EACH BEARING |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | COTTON RETAINER AND PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
| ZZZK | SPECIFICATION/STANDARD DATA | 82577-901861 MANUFACTURERS STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
