| Part Number : E998-804-11 C-C | Manufacturer : Mpb Corporation | ||
| NSN : 3110-01-209-8127 (3110012098127) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 40920 | ||
| NIIN : 01-209-8127 (012098127) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: E99880411CC | |||
Thank you for taking an interest in part number E998-804-11 C-C, that of which is listed with the description Bearing Ball Duplex; Manufactured by Mpb Corporation and listed alongside the NSN 3110012098127, part number E998-804-11 C-C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 ld inc
CAGE Code: 0ACW5 |
3075109 canada inc
CAGE Code: L09L0 |
|
498 msug
CAGE Code: 5VW08 |
2001 humana press inc
CAGE Code: 34CH3 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
43 apple hill llc
CAGE Code: 6AKU8 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
20 10 products inc
CAGE Code: 09KC9 |
3m espana sa
CAGE Code: 0211B,H7034 |
|
3d
CAGE Code: 0WY47 |
3h products co
CAGE Code: 0CJ60 |
|
3m purification pty limited
CAGE Code: Z5295 |
4 r electro systems
CAGE Code: 1T600 |
|
4m sigma corporation
CAGE Code: 0BC31 |
| Part Number : E998-804-11 C-C | Manufacturer : Mpb Corporation | ||
| NSN Number : 3110-01-209-8127 (3110012098127) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 40920 | ||
| NIIN : 012098127 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number E998-804-11 C-C, that of which is listed with the description Bearing Ball Duplex; Manufactured by Mpb Corporation and listed alongside the NSN 3110012098127, part number E998-804-11 C-C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-209-8127 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 012098127 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SR40415B30-11 C-C | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.2030 INCHES MINIMUM AND 0.2350 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.234251 INCHES MINIMUM AND 0.234300 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.406051 INCHES MINIMUM AND 0.406100 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | 0.0006 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| CTHQ | BEARING PRELOAD RATING | 1.75 POUNDS MINIMUM AND 2.25 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 5.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | CONSISTS OF ONE BEARING WITHOUT A FLANGE AND ONE BEARING WITH A FLANGE,FLANGE 0.4360 IN. MIN AND 0.4370 IN. MAX DIA,0.0220 IN. MIN AND 0.0230 IN. MAX W |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | 639S3195 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| SFTT | SURFACE TREATMENT | PASSIVATE BALL |
| SFTT | SURFACE TREATMENT | PASSIVATE INNER RING |
| SFTT | SURFACE TREATMENT | PASSIVATE OUTER RING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
