| Part Number : 3TAR46-52-1 | Manufacturer : Mpb Corporation | ||
| NSN : 3110-01-253-2187 (3110012532187) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 40920 | ||
| NIIN : 01-253-2187 (012532187) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3TAR46521 | |||
Thank you for taking an interest in part number 3TAR46-52-1, that of which is listed with the description Bearing Ball Duplex; Manufactured by Mpb Corporation and listed alongside the NSN 3110012532187, part number 3TAR46-52-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3TAR46-52-1 | Manufacturer : Mpb Corporation | ||
| NSN Number : 3110-01-253-2187 (3110012532187) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 40920 | ||
| NIIN : 012532187 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 3TAR46-52-1, that of which is listed with the description Bearing Ball Duplex; Manufactured by Mpb Corporation and listed alongside the NSN 3110012532187, part number 3TAR46-52-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-253-2187 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 012532187 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 13534201 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 2.8748 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 3.2498 INCHES MINIMUM AND 3.2500 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | LUBRICANT,DRY FILM |
| AGAV | END ITEM IDENTIFICATION | COMBAT TALON II |
| AGYE | SURFACE FINISH | GROUND |
| AGZC | LOAD DIRECTION | RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| CTHQ | BEARING PRELOAD RATING | 0.5 POUNDS MINIMUM AND 10.0 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 25.0 DEGREES NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-21164 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
