| Part Number : 5170205 | Manufacturer : Mtu America Inc | ||
| NSN : 3020-00-391-9543 (3020003919543) | |||
| Item Name : Gear Helical | CAGE Code : 72582 | ||
| NIIN : 00-391-9543 (003919543) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 5170205, that of which is listed with the description Gear Helical; Manufactured by Mtu America Inc and listed alongside the NSN 3020003919543, part number 5170205 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5170205 | Manufacturer : Mtu America Inc | ||
| NSN Number : 3020-00-391-9543 (3020003919543) | |||
| Item Name : Gear Helical | CAGE Code : 72582 | ||
| NIIN : 003919543 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 5170205, that of which is listed with the description Gear Helical; Manufactured by Mtu America Inc and listed alongside the NSN 3020003919543, part number 5170205 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-391-9543 Item PartTypeName: GEAR,HELICAL | 3020 | 003919543 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3170205 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 6.7880 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 64 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 15.0 ROCKWELL C MINIMUM OVERALL AND 23.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.036 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 16.0000 DEGREES |
| CWPZ | HELIX ANGLE | 19.4658 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.188 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.813 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.124 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.189 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.658 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 1.625 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 3 BALANCE WEIGHTS,3 RIVETS,LETTER O STAMPED ON 1ST SIDE OF GEAR 30 DEG 50 MIN 35 SEC FROM CENTER LINE OF KEYWAY CW |
| MATT | MATERIAL | IRON CAST OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE FLUSH HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
