| Part Number : MS24694S124 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-00-058-4022 (5305000584022) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 00-058-4022 (000584022) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MS24694S124, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305000584022, part number MS24694S124 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS24694S124 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-00-058-4022 (5305000584022) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 000584022 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS24694S124, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305000584022, part number MS24694S124 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-058-4022 Item PartTypeName: SCREW,MACHINE | 5305 | 000584022 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS24694S124 | 1 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.428 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.328 INCHES MINIMUM AND 2.375 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
