| Part Number : MS24694C52 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-00-066-7322 (5305000667322) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 00-066-7322 (000667322) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MS24694C52, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305000667322, part number MS24694C52 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m unitek corporation
CAGE Code: 90444 |
4 seasons counting systems inc
CAGE Code: 0MHX5 |
|
5 11 tactical inc
CAGE Code: 3P4J9 |
3d
CAGE Code: 0WY47 |
|
3m company health care mfg
CAGE Code: 04515 |
5s components inc
CAGE Code: 1LNJ8 |
|
12 volt shop
CAGE Code: Z0JM2 |
4dsp llc
CAGE Code: 31UJ9 |
|
4 ld inc
CAGE Code: 0ACW5 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
28eme groupe geographique
CAGE Code: FAR17 |
3d energy pty ltd
CAGE Code: Z0UA3 |
|
3m co admininistrative electronic
CAGE Code: 20999 |
2connect it b v
CAGE Code: HG221 |
|
3h industries inc
CAGE Code: 60754 |
| Part Number : MS24694C52 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-00-066-7322 (5305000667322) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 000667322 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS24694C52, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305000667322, part number MS24694C52 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-066-7322 Item PartTypeName: SCREW,MACHINE | 5305 | 000667322 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5305PL1885119 | 2 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.376 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.641 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 85000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
