| Part Number : MS24693S279 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-00-150-9747 (5305001509747) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 00-150-9747 (001509747) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MS24693S279, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305001509747, part number MS24693S279 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS24693S279 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-00-150-9747 (5305001509747) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 001509747 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS24693S279, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305001509747, part number MS24693S279 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-150-9747 Item PartTypeName: SCREW,MACHINE | 5305 | 001509747 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7S5-10-22 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.313 INCHES MINIMUM AND 1.375 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.375 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AGAV | END ITEM IDENTIFICATION | W/S: INTERMEDIATE FORWARD TEST EQUIP (IFTE) SYSTEM; SUPPORT EQUIPMENT,B-1 AIRCRAFT; AIRCRAFT,STRATOFORTRESS B-52; AIRCRAFT,STRATOLIFTER C-135; AIRCRAFT,B-2 BOMBER (ATB); AIRCRAFT,F-111; AVIATION ENGINE TEST SYSTEM (AETS); AIRCRAFT,HAW |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
