| Part Number : NAS1155V11D | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-00-470-8090 (5305004708090) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 00-470-8090 (004708090) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number NAS1155V11D, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305004708090, part number NAS1155V11D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1155V11D | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-00-470-8090 (5305004708090) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 004708090 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1155V11D, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305004708090, part number NAS1155V11D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-470-8090 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 004708090 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1155V11D | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| AAWB | Shank Unthreaded Hole Diameter | 0.066 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AASK | Head Style | FLAT COUNTERSUNK |
| CMLP | Thread Quantity Per Inch | 24 |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 0.919 INCHES MINIMUM FIRST HOLE AND 0.969 INCHES MAXIMUM FIRST HOLE |
| CSYM | Surface Finish | 32.0 MICROINCHES THREADS |
| AASA | Thread Length | 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD | Thread Series Designator | UNJF |
| MRC | Decoded Requirement | Clear Text Reply |
| AASB | Fastener Length | 1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM |
| ANEE | Grip Length | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| MATT | Material | TITANIUM ALLOY UNS R54520 OVERALL |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| AASL | Head Diameter | 0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| AHYM | Nominal Thread Diameter | 0.312 INCHES |
| AAUR | Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| ZZZK | Specification/Standard Data | 80205-NAS1155 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| MDCL | Material Document And Classification | NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | Thread Class | 3A |
| CSYM | Surface Finish | 32.0 MICROINCHES GRIP |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
