1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   National Aerospace Standards Com   //  NAS333P7 5

NAS333P7-5 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS333P7-5 Manufacturer : National Aerospace Standards Com
NSN : 5305-00-576-1237 (5305005761237)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 00-576-1237  (005761237)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 00 Country : USA
Alternate P/N:  NAS333P75

Thank you for taking an interest in part number NAS333P7-5, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305005761237, part number NAS333P7-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part NAS333P7-5 With Different Manufacturers

NAS333P7-5

RFQ
Recently Viewed Parts
5HL71051-121
The Boeing Company
Bracket Mounting
NSN: 5340014994535
CAGE Code: 81205
RFQ
8690741430
Mtu Friedrichshafen Gmbh
Washer Flat
NSN: 5310121908772
CAGE Code: D8266
RFQ

Related NSN Components to NAS333P7-5

NAS 1611-019
National Aerospace Standards Com
NSN: 5331-01-271-2049
CAGE Code: 80205 		NAS-1611-141
Warren Pumps Llc
NSN: 5331-01-274-7947
CAGE Code: 63857
NAS 1611-123
Thales Australia Bendigoland
NSN: 5331-01-094-5104
CAGE Code: Z0655 		NAS-5-75OHMS-5PCT
International Resistive Company Inc
NSN: 5905-01-254-0558
CAGE Code: 11502
NAS 303R-45-2802
The Boeing Company
NSN: 4010-01-577-7186
CAGE Code: 81205 		NAS 463
National Aerospace Standards Com
NSN: 5310-01-706-3209
CAGE Code: 80205
NAS-1650-0157
Trelleborg Sealing Solutions Ltd
NSN: 4320-01-530-3913
CAGE Code: 09257 		NAS 1771-06
National Aerospace Standards Com
NSN: 5310-01-524-6825
CAGE Code: 80205
NAS-501-3-5A
Zf Industrieantriebe Witten Gmbh
NSN: 5306-00-282-8544
CAGE Code: D9182 		NAS-451-12
National Aerospace Standards Com
NSN: 5340-01-692-3883
CAGE Code: 80205
NAS-1613
Submersible Systems Inc
NSN: 5331-01-367-2693
CAGE Code: 49537 		NAS-1595-4
Federal Screw Products Inc
NSN: 5331-00-020-0203
CAGE Code: 73734
NAS-1612-08CP
National Instruments Corporation
NSN: 5330-01-245-1575
CAGE Code: 03950 		NAS-1660-0360
Trelleborg Sealing Solutions Ltd
NSN: 5330-01-543-7793
CAGE Code: 64422
NAS 1200S
Hp Hewlett Packard Corp
NSN: 5895-01-553-6455
CAGE Code: 1RCQ5 		NAS-1611-439
Parker Hannifin Corporation
NSN: 5331-01-326-9281
CAGE Code: 02697

Top nsn Manufacturers

526th emxs fabrication 498 msug
2is inc 3d pep
5605 n illinois inc 200 park inc
3m unitek corporation 3m co engineering document systems
21st century enterprises inc 2eme regiment du materiel
2001 micro systemation ab 3 wire group inc
3m industrial adhesives and tapes 4 c s welding lab inc
14 dock drive inc

NAS333P7-5 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS333P7-5 Manufacturer : National Aerospace Standards Com
NSN Number : 5305-00-576-1237 (5305005761237)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 005761237
FSC CODE : 5305 Screws

Thank you for taking an interest in part number NAS333P7-5, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305005761237, part number NAS333P7-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number NAS333P7-5

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number NAS333P7-5 with NSN 5305-00-576-1237, 5305005761237

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-00-576-1237

Item PartTypeName:

SCREW,CLOSE TOLERANCE

5305005761237N
CIICHCCESDPMICCriticalityENAC
A0
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS333P7-5123

Characteristics Data of NSN 5305-00-576-1237, 5305005761237

MRCCriteriaCharacteristic
AAWBSHANK UNTHREADED HOLE DIAMETER0.070 INCHES NOMINAL FIRST HOLE
ABQZINTERNAL DRIVE STYLECROSS RECESS TYPE 1
AHYMNOMINAL THREAD DIAMETER0.190 INCHES
ANEEGRIP LENGTH0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH32
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.819 INCHES MINIMUM FIRST HOLE AND 0.839 INCHES MAXIMUM FIRST HOLE
CSYMSURFACE FINISH32.0 MICROINCHES GRIP
MATTMATERIALSTEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATE
THSDTHREAD SERIES DESIGNATORUNF
ZZZKSPECIFICATION/STANDARD DATA80205-NAS333 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
AASBFASTENER LENGTH0.952 INCHES MINIMUM AND 0.999 INCHES MAXIMUM
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
AAURGRIP DIAMETER0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
Upload  

Frequently Asked Questions (FAQ): NAS333P7-5 NSN Part

What Type of Item Is Part Number NAS333P7-5?
  • Part Number NAS333P7-5 is an "Screw Close Tolerance" manufactured by National Aerospace Standards Com Managed with the NSN 5305-00-576-1237. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number NAS333P7-5?
  • Screw Close Tolerance To receive a competitive quote for items with the part number NAS333P7-5, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80205 Important When Purchasing Part Number NAS333P7-5?
  • CAGE Code 80205 signifies National Aerospace Standards Com Managed as the manufacturer of Part Number NAS333P7-5, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-00-576-1237 Paired with Part Number NAS333P7-5?
  • Part Number NAS333P7-5 is the identification assigned to the item by National Aerospace Standards Com Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-00-576-1237 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up