| Part Number : NAS51959 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-00-719-5064 (5305007195064) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 00-719-5064 (007195064) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number NAS51959, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305007195064, part number NAS51959 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS51959 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-00-719-5064 (5305007195064) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 007195064 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS51959, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305007195064, part number NAS51959 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-719-5064 Item PartTypeName: SCREW,MACHINE | 5305 | 007195064 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 230-013-030 | 3 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.500 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AGAV | END ITEM IDENTIFICATION | MEDIUM MINE PROTECTED VEHICLE-MMPV |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
