| Part Number : MS24693-S29 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-00-808-7832 (5305008087832) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 00-808-7832 (008087832) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS24693S29 | |||
Thank you for taking an interest in part number MS24693-S29, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305008087832, part number MS24693-S29 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m medical imaging
CAGE Code: 0ZRE5 |
20th century spring mfg
CAGE Code: 0PZE8 |
|
1 source electronics inc
CAGE Code: 551K1 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
5 11 tactical inc
CAGE Code: 3P4J9 |
3w interface corp
CAGE Code: 4V367 |
|
3075109 canada inc
CAGE Code: L09L0 |
2415779 ontario inc
CAGE Code: L09L7 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
2h energy
CAGE Code: F1797 |
|
313 aerospace llc
CAGE Code: 3VEK3 |
3m health care ltd
CAGE Code: U5989 |
|
3 v fastener co inc
CAGE Code: 1ER65 |
5605 n illinois inc
CAGE Code: 089F4 |
|
3m belgium nv
CAGE Code: B2281 |
| Part Number : MS24693-S29 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-00-808-7832 (5305008087832) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 008087832 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS24693-S29, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305008087832, part number MS24693-S29 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-808-7832 Item PartTypeName: SCREW,MACHINE | 5305 | 008087832 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10236-0310-0001 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE II |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 3C STYLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
