| Part Number : MS3369B510 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-038-2141 (5305010382141) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-038-2141 (010382141) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MS3369B510, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305010382141, part number MS3369B510 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS3369B510 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-038-2141 (5305010382141) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 010382141 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS3369B510, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305010382141, part number MS3369B510 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-038-2141 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010382141 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CA2658-5-10 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.306 INCHES MINIMUM AND 0.357 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.103 INCHES MINIMUM AND 1.123 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AASU | HEAD HEIGHT | 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.990 INCHES MINIMUM FIRST HOLE AND 1.010 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
