| Part Number : NAS1581C3T3 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-054-5957 (5305010545957) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-054-5957 (010545957) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS1581C3T3, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305010545957, part number NAS1581C3T3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1581C3T3 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-054-5957 (5305010545957) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 010545957 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1581C3T3, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305010545957, part number NAS1581C3T3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-054-5957 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010545957 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5305PL0883741 | 1 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.337 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.534 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 OR AMS 5732 OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
