1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   National Aerospace Standards Com   //  MS21130B450

MS21130B450 part number of National Aerospace Standards Com - Order Now!

Part Number : MS21130B450 Manufacturer : National Aerospace Standards Com
NSN : 5305-01-197-5930 (5305011975930)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 01-197-5930  (011975930)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 01 Country : USA

Thank you for taking an interest in part number MS21130B450, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305011975930, part number MS21130B450 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part MS21130B450 With Different Manufacturers

MS21130B450

RFQ

MS21130B450

RFQ
Recently Viewed Parts
3564017
Renault Trucks Defense
Gasket
NSN: 5330006134298
CAGE Code: F6573
RFQ
SS-S-736 TY2CLBST1
General Services Administration Inc
Stone Sharpening
NSN: 5345005844543
CAGE Code: 80244
RFQ

Related NSN Components to MS21130B450

MS2-WM
Fluke Corporation
NSN: 6625-01-616-2124
CAGE Code: 89536 		MS20001
Military Standards Corp
NSN: 5340-01-682-4919
CAGE Code: 96906
MS200
American Safety Technologies Inc
NSN: 8010-01-550-6888
CAGE Code: 88444 		MS2-0R2H
Ultronix Inc
NSN: 5905-01-330-7565
CAGE Code: 05347
MS2-50
Minelco Inc
NSN: 5905-00-499-7236
CAGE Code: 07479 		MS200
American Safety Technologies Inc
NSN: 8010-01-550-6887
CAGE Code: 88444
MS2-M-32-625-L-1CA-A-17C
Carling Technologies Inc
NSN: 5930-01-705-0765
CAGE Code: 73559 		MS2-2M-SN
Cospolich Inc
NSN: 4110-01-445-3017
CAGE Code: 66682
MS20-26KDG
Lionel Electronic Laboratories
NSN: 5935-00-944-7163
CAGE Code: 91491 		MS20001
Military Standards Corp
NSN: 5340-01-463-0040
CAGE Code: 96906
MS2-3A-CC-6.00-51.625-HIM1A
Hanna Cylinders Llc
NSN: 3040-01-326-0870
CAGE Code: 7D4J9 		MS20001
Military Standards Corp
NSN: 5340-01-464-1909
CAGE Code: 96906
MS200005H70
National Aerospace Standards Com
NSN: 5306-01-412-4890
CAGE Code: 80205 		MS20-1600EAHP
Hirschmann Electronics Inc
NSN: 5895-01-618-0143
CAGE Code: 0D5M6
MS20-14SKDGF
Lionel Electronic Laboratories
NSN: 5935-00-761-3871
CAGE Code: 91491 		MS200-NFW2
Display Products Inc
NSN: 6210-01-524-0189
CAGE Code: 15513

Top nsn Manufacturers

31 mile equipment co
CAGE Code: 07PE3 		2001 humana press inc
CAGE Code: 34CH3
3m quante ag telekommunikation
CAGE Code: D2771 		11 30 elo touchsystems inc
CAGE Code: 1CEX6
3h products co
CAGE Code: 0CJ60 		3m touch systems canada ltd
CAGE Code: L0831
3ps inc
CAGE Code: 1MHK2 		3m alaska
CAGE Code: 0NZU5
101communications inc
CAGE Code: 1WS16 		3w interface corp
CAGE Code: 4V367
394 test maintenance squadron sac
CAGE Code: 33044 		3g shielding specialties lp
CAGE Code: 7PCU6
2eme regiment du materiel
CAGE Code: FARD5 		3m medical imaging
CAGE Code: 0ZRE5
2101 llc
CAGE Code: 1GH76

MS21130B450 part number of National Aerospace Standards Com - Order Now!

Part Number : MS21130B450 Manufacturer : National Aerospace Standards Com
NSN Number : 5305-01-197-5930 (5305011975930)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 011975930
FSC CODE : 5305 Screws

Thank you for taking an interest in part number MS21130B450, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305011975930, part number MS21130B450 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number MS21130B450

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number MS21130B450 with NSN 5305-01-197-5930, 5305011975930

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-197-5930

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050119759300N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
MS21130B450523

Characteristics Data of NSN 5305-01-197-5930, 5305011975930

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
AASBFASTENER LENGTH3.543 INCHES MINIMUM AND 3.563 INCHES MAXIMUM
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
AAUMLOCKING FEATUREDETENT BALL GRIP
AAURGRIP DIAMETER0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZINTERNAL DRIVE STYLEHIGH-TORQUE
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
ANEEGRIP LENGTH3.125 INCHES MINIMUM AND 3.141 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH28
CQBCMINIMUM TENSILE STRENGTH63000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING43.0 ROCKWELL C MINIMUM FASTENER AND 47.0 ROCKWELL C MAXIMUM FASTENER
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER3.448 INCHES MINIMUM FIRST HOLE AND 3.468 INCHES MAXIMUM FIRST HOLE
CSYMSURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYMSURFACE FINISH32.0 MICROINCHES GRIP
MATTMATERIALSTEEL COMP 631 SPRING OR STEEL COMP 302 SPRING
MATTMATERIALSTEEL COMP 632 FASTENER
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF
Upload  

Frequently Asked Questions (FAQ): MS21130B450 NSN Part

What Type of Item Is Part Number MS21130B450?
  • Part Number MS21130B450 is an "Screw Close Tolerance" manufactured by National Aerospace Standards Com Managed with the NSN 5305-01-197-5930. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number MS21130B450?
  • Screw Close Tolerance To receive a competitive quote for items with the part number MS21130B450, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80205 Important When Purchasing Part Number MS21130B450?
  • CAGE Code 80205 signifies National Aerospace Standards Com Managed as the manufacturer of Part Number MS21130B450, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-01-197-5930 Paired with Part Number MS21130B450?
  • Part Number MS21130B450 is the identification assigned to the item by National Aerospace Standards Com Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-01-197-5930 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up