1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   National Aerospace Standards Com   //  NAS1580C4R3

NAS1580C4R3 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS1580C4R3 Manufacturer : National Aerospace Standards Com
NSN : 5305-01-303-8730 (5305013038730)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 01-303-8730  (013038730)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 01 Country : USA

Thank you for taking an interest in part number NAS1580C4R3, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305013038730, part number NAS1580C4R3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part NAS1580C4R3 With Different Manufacturers

NAS1580C4R3

RFQ

NAS1580C4R3

RFQ
Recently Viewed Parts
H-48-S
Rbc Bearings Incorporated
CAM FOLLOWER,NEEDLE BEARING
RFQ
PFG24TF
Dixon Valve And Coupling Company
Gasket
NSN: 5330015344894
CAGE Code: 72661
RFQ

Related NSN Components to NAS1580C4R3

NAS 1726V3D
National Aerospace Standards Com
NSN: 5310-01-682-2665
CAGE Code: 80205 		NAS 537-3P024
National Aerospace Standards Com
NSN: 3120-01-184-6544
CAGE Code: 80205
NAS 1724D4-23E
National Aerospace Standards Com
NSN: 5320-01-102-8501
CAGE Code: 80205 		NAS 2803-12
National Aerospace Standards Com
NSN: 5305-01-530-9646
CAGE Code: 80205
NAS-1352-01-4
Zf Industrieantriebe Witten Gmbh
NSN: 5305-00-455-2641
CAGE Code: D9182 		NAS 303R-45-2802
The Boeing Company
NSN: 4010-01-577-7186
CAGE Code: 81205
NAS 1063
National Aerospace Standards Com
NSN: 5970-00-827-0768
CAGE Code: 80205 		NAS 345-60
National Aerospace Standards Com
NSN: 9540-00-514-9976
CAGE Code: 80205
NAS-1650-0157
Trelleborg Sealing Solutions Ltd
NSN: 4320-01-530-3913
CAGE Code: 09257 		NAS-3-007
National Aerospace Standards Com
NSN: 3120-00-517-8551
CAGE Code: 80205
NAS 1739 - B5 - 7
Aertekno Srl
NSN: 5320-00-410-0014
CAGE Code: AC910 		NAS-1611-439
Parker Hannifin Corporation
NSN: 5331-01-326-9281
CAGE Code: 02697
NAS 302 THRU 310
National Aerospace Standards Com
NSN: 4010-00-136-5764
CAGE Code: 80205 		NAS-1611-439
National Aerospace Standards Com
NSN: 5331-01-326-9281
CAGE Code: 80205
NAS 583-R6
National Aerospace Standards Com
NSN: 5305-01-446-7626
CAGE Code: 80205 		NAS 451-51
Edwin B Stimpson Company Inc
NSN: 5340-01-249-0238
CAGE Code: 57771

Top nsn Manufacturers

3e technologies international inc
CAGE Code: 1DEZ4 		25 canadian forces supply depot
CAGE Code: 35637
17th st photo supply inc
CAGE Code: 1VV61 		526th emxs fabrication
CAGE Code: 69XG4
28eme groupe geographique
CAGE Code: FAR17 		3d energy pty ltd
CAGE Code: Z0UA3
3d robotics llc
CAGE Code: 64TY6 		3m united kingdom plc
CAGE Code: K0993,K8767
12 volt shop
CAGE Code: Z0JM2 		1 nation electronics llc
CAGE Code: 1XP36
21st century optics inc
CAGE Code: 0TN38 		3d instruments llc
CAGE Code: 1XHY4,52159,64528
3 dimensional engineering inc
CAGE Code: 1HLX4 		4 sure com inc
CAGE Code: 1LDH8
5 11 inc
CAGE Code: 3YEL6

NAS1580C4R3 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS1580C4R3 Manufacturer : National Aerospace Standards Com
NSN Number : 5305-01-303-8730 (5305013038730)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 013038730
FSC CODE : 5305 Screws

Thank you for taking an interest in part number NAS1580C4R3, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305013038730, part number NAS1580C4R3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number NAS1580C4R3

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number NAS1580C4R3 with NSN 5305-01-303-8730, 5305013038730

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-303-8730

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050130387300N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS1580C4R3523

Characteristics Data of NSN 5305-01-303-8730, 5305013038730

MRCCriteriaCharacteristic
AAURGRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
ABQZINTERNAL DRIVE STYLETORQUE-SET RIBBED
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
AAJFTHREAD DIRECTIONRIGHT-HAND
AASBFASTENER LENGTH0.575 INCHES MINIMUM AND 0.605 INCHES MAXIMUM
ZZZKSPECIFICATION/STANDARD DATA80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
AASATHREAD LENGTH0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
CMLPTHREAD QUANTITY PER INCH28
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CSYMSURFACE FINISH32.0 MICROINCHES THREADS
MATTMATERIALIRON ALLOY 660 OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF
AAJDTHREAD CLASS3A
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.464 INCHES MINIMUM AND 0.506 INCHES MAXIMUM
ANEEGRIP LENGTH0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
CSYMSURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYMSURFACE FINISH32.0 MICROINCHES GRIP
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Upload  

Frequently Asked Questions (FAQ): NAS1580C4R3 NSN Part

What Type of Item Is Part Number NAS1580C4R3?
  • Part Number NAS1580C4R3 is an "Screw Close Tolerance" manufactured by National Aerospace Standards Com Managed with the NSN 5305-01-303-8730. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number NAS1580C4R3?
  • Screw Close Tolerance To receive a competitive quote for items with the part number NAS1580C4R3, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80205 Important When Purchasing Part Number NAS1580C4R3?
  • CAGE Code 80205 signifies National Aerospace Standards Com Managed as the manufacturer of Part Number NAS1580C4R3, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-01-303-8730 Paired with Part Number NAS1580C4R3?
  • Part Number NAS1580C4R3 is the identification assigned to the item by National Aerospace Standards Com Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-01-303-8730 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up