1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   National Aerospace Standards Com   //  NAS7304A5

NAS7304A5 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS7304A5 Manufacturer : National Aerospace Standards Com
NSN : 5305-01-338-2842 (5305013382842)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 01-338-2842  (013382842)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 01 Country : USA

Thank you for taking an interest in part number NAS7304A5, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305013382842, part number NAS7304A5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part NAS7304A5 With Different Manufacturers

NAS7304A5

RFQ

NAS7304A5

RFQ
Recently Viewed Parts
9043187-23
Hawker Beechcraft Corporation
RFQ
7-311A21221-5
Mcdonnell Douglas Helicopter Co Inc
Seal Rubber Strip
NSN: 5330011710494
CAGE Code: 02731
RFQ

Related NSN Components to NAS7304A5

NAS 583-R7
Aerea Spa
NSN: 5305-01-446-7627
CAGE Code: A1577 		NAS-1598-3Y
Zf Industrieantriebe Witten Gmbh
NSN: 5330-01-145-5161
CAGE Code: D9182
NAS 4117-648
National Aerospace Standards Com
NSN: 5999-01-455-9262
CAGE Code: 80205 		NAS 4121
National Aerospace Standards Com
NSN: 5999-01-209-0650
CAGE Code: 80205
NAS-1595-4
Federal Screw Products Inc
NSN: 5331-00-020-0203
CAGE Code: 73734 		NAS-5-16R7D
Shallcross Inc
NSN: 5905-01-328-4529
CAGE Code: 54294
NAS-1334C3C07F
Zf Industrieantriebe Witten Gmbh
NSN: 5315-01-018-5839
CAGE Code: D9182 		NAS-1352C3H32
Zf Industrieantriebe Witten Gmbh
NSN: 5305-01-171-0545
CAGE Code: D9182
NAS 302 THRU 310
National Aerospace Standards Com
NSN: 4010-00-136-5764
CAGE Code: 80205 		NAS-5110
Bud Industries Inc
NSN: 5340-01-426-2529
CAGE Code: 71218
NAS-334-CA6
National Aerospace Standards Com
NSN: 5305-01-229-2824
CAGE Code: 80205 		NAS 1142-6
National Aerospace Standards Com
NSN: 5305-01-530-9348
CAGE Code: 80205
NAS 1958C24DP
National Aerospace Standards Com
NSN: 5306-01-682-6631
CAGE Code: 80205 		NAS 1142-4
National Aerospace Standards Com
NSN: 5305-01-530-9349
CAGE Code: 80205
NAS-501-3-5A
Zf Industrieantriebe Witten Gmbh
NSN: 5306-00-282-8544
CAGE Code: D9182 		NAS-1611-439
Parker Hannifin Corporation
NSN: 5331-01-326-9281
CAGE Code: 02697

Top nsn Manufacturers

331 l tech productions llc 2m machining and manufacturing
3d instruments llc 3h products co
320 matlogpel breda centrale 3 l filters ltd
4 c s welding lab inc 3m telecom system group
3 dimensional engineering inc 3 m federal systems dept
3m alaska 3m company
3 d machining inc 3m australia pty ltd
3m co abrasive systems division

NAS7304A5 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS7304A5 Manufacturer : National Aerospace Standards Com
NSN Number : 5305-01-338-2842 (5305013382842)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 013382842
FSC CODE : 5305 Screws

Thank you for taking an interest in part number NAS7304A5, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305013382842, part number NAS7304A5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number NAS7304A5

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number NAS7304A5 with NSN 5305-01-338-2842, 5305013382842

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-338-2842

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050133828420N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS7304A5523

Characteristics Data of NSN 5305-01-338-2842, 5305013382842

MRCCriteriaCharacteristic
AASKHEAD STYLEFLAT COUNTERSUNK
AAURGRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
AAJDTHREAD CLASS3A
ABQZINTERNAL DRIVE STYLECROSS RECESS TYPE 1
SFTTSURFACE TREATMENTALUMINUM OVERALL
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.425 INCHES NOMINAL
AASBFASTENER LENGTH0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
AASLHEAD DIAMETER0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
ANEEGRIP LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH28
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
MATTMATERIALTITANIUM ALLOY UNS R56400 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF
ZZZKSPECIFICATION/STANDARD DATA80205-NAS7304 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Upload  

Frequently Asked Questions (FAQ): NAS7304A5 NSN Part

What Type of Item Is Part Number NAS7304A5?
  • Part Number NAS7304A5 is an "Screw Close Tolerance" manufactured by National Aerospace Standards Com Managed with the NSN 5305-01-338-2842. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number NAS7304A5?
  • Screw Close Tolerance To receive a competitive quote for items with the part number NAS7304A5, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80205 Important When Purchasing Part Number NAS7304A5?
  • CAGE Code 80205 signifies National Aerospace Standards Com Managed as the manufacturer of Part Number NAS7304A5, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-01-338-2842 Paired with Part Number NAS7304A5?
  • Part Number NAS7304A5 is the identification assigned to the item by National Aerospace Standards Com Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-01-338-2842 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up