1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   National Aerospace Standards Com   //  NAS7304A14

NAS7304A14 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS7304A14 Manufacturer : National Aerospace Standards Com
NSN : 5305-01-338-4033 (5305013384033)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 01-338-4033  (013384033)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 01 Country : USA

Thank you for taking an interest in part number NAS7304A14, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305013384033, part number NAS7304A14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part NAS7304A14 With Different Manufacturers

NAS7304A14

RFQ

NAS7304A14

RFQ
Recently Viewed Parts
6890529
Allison Transmission Inc
Rotor Fan Aircraft Gas Turbine E
NSN: 2840014352791
CAGE Code: 73342
RFQ
C10-20PGDFURN50
Winchester Electronics Corporation
Connector Receptacle Electrical
NSN: 5935004302832
CAGE Code: 95238
RFQ

Related NSN Components to NAS7304A14

NAS 1424 04
National Aerospace Standards Com
NSN: 5320-00-150-4221
CAGE Code: 80205 		NAS 302 THRU 310
National Aerospace Standards Com
NSN: 4010-00-136-5764
CAGE Code: 80205
NAS-1922-0200-2H
Federal Specifications
NSN: 5342-00-405-9150
CAGE Code: 81348 		NAS 1611-010
National Aerospace Standards Com
NSN: 5331-01-271-2533
CAGE Code: 80205
NAS-1383
Federal Specifications
NSN: 5342-00-262-3245
CAGE Code: 81348 		NAS-1611-439
National Aerospace Standards Com
NSN: 5331-01-326-9281
CAGE Code: 80205
NAS 1739 - B5 - 5
Aertekno Srl
NSN: 5320-00-131-7459
CAGE Code: AC910 		NAS-451-12
National Aerospace Standards Com
NSN: 5340-01-692-3883
CAGE Code: 80205
NAS-1922-0875-3
National Aerospace Standards Com
NSN: 4730-01-414-7859
CAGE Code: 80205 		NAS 1352-8-8P
National Aerospace Standards Com
NSN: 5305-00-978-9370
CAGE Code: 80205
NAS 1143-12
National Aerospace Standards Com
NSN: 5305-01-530-9648
CAGE Code: 80205 		NAS 451-51
Edwin B Stimpson Company Inc
NSN: 5340-01-249-0238
CAGE Code: 57771
NAS-1352C3LL6
Zf Industrieantriebe Witten Gmbh
NSN: 5305-01-142-2119
CAGE Code: D9182 		NAS-4-020
National Aerospace Standards Com
NSN: 3120-00-671-7166
CAGE Code: 80205
NAS 1958C24DP
National Aerospace Standards Com
NSN: 5306-01-682-6631
CAGE Code: 80205 		NAS-1356C2C47D
General Electric Company
NSN: 5315-01-286-4813
CAGE Code: 07482

Top nsn Manufacturers

5dt inc
CAGE Code: 3BPF1 		3d evolution ltd
CAGE Code: KD959
5 prime 3 prime inc
CAGE Code: 1B2Z0 		2001 micro systemation ab
CAGE Code: SK396
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 		20th century fiberglass
CAGE Code: 80241
3 v fastener co inc
CAGE Code: 1ER65 		4dsp llc
CAGE Code: 31UJ9
3gen grup trafik ltd
CAGE Code: TB427 		1 source electronic components inc
CAGE Code: 3FY68
5s components inc
CAGE Code: 1LNJ8 		3ps inc
CAGE Code: 1MHK2
43 apple hill llc
CAGE Code: 6AKU8 		1st american metals inc
CAGE Code: 0MP49
3d instruments llc
CAGE Code: 1XHY4,52159,64528

NAS7304A14 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS7304A14 Manufacturer : National Aerospace Standards Com
NSN Number : 5305-01-338-4033 (5305013384033)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 013384033
FSC CODE : 5305 Screws

Thank you for taking an interest in part number NAS7304A14, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305013384033, part number NAS7304A14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number NAS7304A14

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number NAS7304A14 with NSN 5305-01-338-4033, 5305013384033

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-338-4033

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050133840330N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS7304A14523

Characteristics Data of NSN 5305-01-338-4033, 5305013384033

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AASATHREAD LENGTH0.425 INCHES NOMINAL
AASKHEAD STYLEFLAT COUNTERSUNK
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS4006 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF
AAJFTHREAD DIRECTIONRIGHT-HAND
AASLHEAD DIAMETER0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM
AASBFASTENER LENGTH1.285 INCHES MINIMUM AND 1.315 INCHES MAXIMUM
AAURGRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
ABQZINTERNAL DRIVE STYLECROSS RECESS TYPE 1
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
ANEEGRIP LENGTH0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH28
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATTMATERIALTITANIUM ALLOY UNS R56400 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTALUMINUM OVERALL
ZZZKSPECIFICATION/STANDARD DATA80205-NAS7304 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Upload  

Frequently Asked Questions (FAQ): NAS7304A14 NSN Part

What Type of Item Is Part Number NAS7304A14?
  • Part Number NAS7304A14 is an "Screw Close Tolerance" manufactured by National Aerospace Standards Com Managed with the NSN 5305-01-338-4033. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number NAS7304A14?
  • Screw Close Tolerance To receive a competitive quote for items with the part number NAS7304A14, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80205 Important When Purchasing Part Number NAS7304A14?
  • CAGE Code 80205 signifies National Aerospace Standards Com Managed as the manufacturer of Part Number NAS7304A14, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-01-338-4033 Paired with Part Number NAS7304A14?
  • Part Number NAS7304A14 is the identification assigned to the item by National Aerospace Standards Com Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-01-338-4033 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up