| Part Number : NAS1152E5 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-438-5205 (5305014385205) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-438-5205 (014385205) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS1152E5, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305014385205, part number NAS1152E5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1152E5 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-438-5205 (5305014385205) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 014385205 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1152E5, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305014385205, part number NAS1152E5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-438-5205 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014385205 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1152E5 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TY2 OR TY8 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.276 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1152 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| AASL | HEAD DIAMETER | 0.280 INCHES MINIMUM AND 0.337 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AAJD | THREAD CLASS | 3A |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CMLP | THREAD QUANTITY PER INCH | 32 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
