1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   National Aerospace Standards Com   //  NAS2835C11DT

NAS2835C11DT part number of National Aerospace Standards Com - Order Now!

Part Number : NAS2835C11DT Manufacturer : National Aerospace Standards Com
NSN : 5305-01-447-7006 (5305014477006)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 01-447-7006  (014477006)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 01 Country : USA

Thank you for taking an interest in part number NAS2835C11DT, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305014477006, part number NAS2835C11DT is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part NAS2835C11DT With Different Manufacturers

NAS2835C11DT

RFQ
Recently Viewed Parts
A8.4 DIN 125-ST
Zf Group North American Operations
Washer Flat
NSN: 5310012565223
CAGE Code: 6V370
RFQ
01513-50818
Kubota Engine America Corp
Stud Stepped
NSN: 5307015964431
CAGE Code: 1Q0C4
RFQ

Related NSN Components to NAS2835C11DT

NAS 345-60
National Aerospace Standards Com
NSN: 9540-00-514-9976
CAGE Code: 80205 		NAS-1611-010
Federal Specifications
NSN: 5331-01-271-2533
CAGE Code: 81348
NAS 1739 - B5 - 5
Aertekno Srl
NSN: 5320-00-131-7459
CAGE Code: AC910 		NAS 1099-18
National Aerospace Standards Com
NSN: 5310-01-284-6395
CAGE Code: 80205
NAS 1611
National Aerospace Standards Com
NSN: 5330-01-053-3994
CAGE Code: 80205 		NAS 1611-141
National Aerospace Standards Com
NSN: 5331-01-274-7947
CAGE Code: 80205
NAS 1611-012
National Aerospace Standards Com
NSN: 5331-01-271-2532
CAGE Code: 80205 		NAS 1010-26A
National Aerospace Standards Com
NSN: 5306-01-132-2759
CAGE Code: 80205
NAS 1099-16
National Aerospace Standards Com
NSN: 5310-01-284-6395
CAGE Code: 80205 		NAS-509-12
Zf Industrieantriebe Witten Gmbh
NSN: 5310-00-298-9255
CAGE Code: D9182
NAS 1142-4
National Aerospace Standards Com
NSN: 5305-01-530-9349
CAGE Code: 80205 		NAS 1304-17DH
Standard Air Parts Inc
NSN: 5306-00-115-6138
CAGE Code: 3G656
NAS-1660-0360
Trelleborg Sealing Solutions Ltd
NSN: 5330-01-543-7793
CAGE Code: 64422 		NAS-1612-08CP
National Instruments Corporation
NSN: 5330-01-245-1575
CAGE Code: 03950
NAS-1356C2C47D
General Electric Company
NSN: 5315-01-286-4813
CAGE Code: 07482 		NAS 583-R6
National Aerospace Standards Com
NSN: 5305-01-446-7626
CAGE Code: 80205

Top nsn Manufacturers

3 v fastener co inc
CAGE Code: 1ER65 		28eme groupe geographique
CAGE Code: FAR17
25 canadian forces supply depot
CAGE Code: 35637 		4dsp llc
CAGE Code: 31UJ9
184th air refueling wing
CAGE Code: 3EP27 		3m co engineering document systems
CAGE Code: 1BY21
3dfx interactive
CAGE Code: KA796 		21st century optics inc
CAGE Code: 0TN38
4 c s welding lab inc
CAGE Code: 59685 		3 d machining inc
CAGE Code: 09SY7
3m unitek corporation
CAGE Code: 90444 		3 wire group inc
CAGE Code: 4X0B1,7VME3
3 star papers limited
CAGE Code: 3DNS9 		3com sas
CAGE Code: F9930
3 dimensional engineering inc
CAGE Code: 1HLX4

NAS2835C11DT part number of National Aerospace Standards Com - Order Now!

Part Number : NAS2835C11DT Manufacturer : National Aerospace Standards Com
NSN Number : 5305-01-447-7006 (5305014477006)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 014477006
FSC CODE : 5305 Screws

Thank you for taking an interest in part number NAS2835C11DT, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305014477006, part number NAS2835C11DT is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number NAS2835C11DT

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number NAS2835C11DT with NSN 5305-01-447-7006, 5305014477006

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-447-7006

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050144770060N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS2835C11DT523

Characteristics Data of NSN 5305-01-447-7006, 5305014477006

MRCCriteriaCharacteristic
AAWBShank Unthreaded Hole Diameter0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
AASKHead StyleFLAT COUNTERSUNK
CMLPThread Quantity Per Inch24
SFTTSurface TreatmentPASSIVATE OVERALL
THSDThread Series DesignatorUNF
MRCDecoded RequirementClear Text Reply
AASBFastener Length1.1105 INCHES MINIMUM AND 1.1405 INCHES MAXIMUM
AASAThread Length0.438 INCHES NOMINAL
MDCLMaterial Document And ClassificationAMS GAAMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ANEEGrip Length0.6775 INCHES MINIMUM AND 0.6975 INCHES MAXIMUM
CRZSDistance From Head Largest Bearing Surface To Shank Hole Center1.006 INCHES NOMINAL FIRST HOLE
ABQZInternal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
AASLHead Diameter0.577 INCHES MINIMUM
AAJFThread DirectionRIGHT-HAND
AHYMNominal Thread Diameter0.312 INCHES
ZZZKSpecification/Standard Data80205-NAS2835 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
AAURGrip Diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
CRSQCountersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATTMaterialIRON ALLOY 660 OVERALL
AAJDThread Class3A
STDCSurface Treatment Document And ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Upload  

Frequently Asked Questions (FAQ): NAS2835C11DT NSN Part

What Type of Item Is Part Number NAS2835C11DT?
  • Part Number NAS2835C11DT is an "Screw Close Tolerance" manufactured by National Aerospace Standards Com Managed with the NSN 5305-01-447-7006. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number NAS2835C11DT?
  • Screw Close Tolerance To receive a competitive quote for items with the part number NAS2835C11DT, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80205 Important When Purchasing Part Number NAS2835C11DT?
  • CAGE Code 80205 signifies National Aerospace Standards Com Managed as the manufacturer of Part Number NAS2835C11DT, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-01-447-7006 Paired with Part Number NAS2835C11DT?
  • Part Number NAS2835C11DT is the identification assigned to the item by National Aerospace Standards Com Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-01-447-7006 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up