| Part Number : NA0042 050026 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-493-2708 (5305014932708) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-493-2708 (014932708) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NA0042 050026, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305014932708, part number NA0042 050026 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NA0042 050026 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-493-2708 (5305014932708) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 014932708 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NA0042 050026, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305014932708, part number NA0042 050026 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-493-2708 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014932708 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NA0042-050026 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | GRIP DIAMETER | 4.978 MILLIMETERS MINIMUM AND 4.990 MILLIMETERS MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 4.973 MILLIMETERS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | MJ |
| ASXK | HOLE QUANTITY | 1 |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAWU | SINGLE SHEAR STRENGTH | 600 MEGAPASCALS |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASA | THREAD LENGTH | 9.0 MILLIMETERS NOMINAL |
| CQQR | THREAD PITCH IN MILLIMETERS | 8.0 |
| ANEE | GRIP LENGTH | 9.0 MILLIMETERS NOMINAL |
| AASL | HEAD DIAMETER | 10.0 MILLIMETERS NOMINAL |
| ABQJ | POINT STYLE | FLAT |
| MATT | MATERIAL | STEEL OVERALL |
| AASB | FASTENER LENGTH | 37.12 MILLIMETERS NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAVA | POINT DIAMETER | 3.5 MILLIMETERS MINIMUM AND 4.0 MILLIMETERS MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
