1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   National Aerospace Standards Com   //  NAS1131 26

NAS1131 26 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS1131 26 Manufacturer : National Aerospace Standards Com
NSN : 5305-01-504-3736 (5305015043736)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 01-504-3736  (015043736)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 01 Country : USA

Thank you for taking an interest in part number NAS1131 26, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015043736, part number NAS1131 26 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part NAS1131 26 With Different Manufacturers

NAS1131-26

RFQ
Recently Viewed Parts
695813-1
Lockheed Martin Corporation
Valve Check
NSN: 4820000065087
CAGE Code: 98897
RFQ
4950255
Hamilton Sundstrand Corporation
Gasket
NSN: 5330014468670
CAGE Code: 55820
RFQ

Related NSN Components to NAS1131 26

NAS-451-12
National Aerospace Standards Com
NSN: 5340-01-692-3883
CAGE Code: 80205 		NAS-1351-4LL-28
National Aerospace Standards Com
NSN: 5305-00-901-5074
CAGE Code: 80205
NAS 1464-098-10N
National Aerospace Standards Com
NSN: 5340-01-556-3996
CAGE Code: 80205 		NAS-1611-017CP
Zf Industrieantriebe Witten Gmbh
NSN: 5330-01-247-9903
CAGE Code: D9182
NAS 1010-26A
National Aerospace Standards Com
NSN: 5306-01-132-2759
CAGE Code: 80205 		NAS-334-CA6
National Aerospace Standards Com
NSN: 5305-01-229-2824
CAGE Code: 80205
NAS 1739 - B5 - 5
Aertekno Srl
NSN: 5320-00-131-7459
CAGE Code: AC910 		NAS 1351N14H38S
National Aerospace Standards Com
NSN: 5305-01-516-8921
CAGE Code: 80205
NAS 1738-B5-3
Aertekno Srl
NSN: 5320-00-779-0293
CAGE Code: AC910 		NAS-1598-3Y
Zf Industrieantriebe Witten Gmbh
NSN: 5330-01-145-5161
CAGE Code: D9182
NAS 1351N14H90S
National Aerospace Standards Com
NSN: 5305-01-516-8920
CAGE Code: 80205 		NAS 1726V3D
National Aerospace Standards Com
NSN: 5310-01-682-2665
CAGE Code: 80205
NAS 1352-03LE4
Zf Industrieantriebe Witten Gmbh
NSN: 5305-01-282-5679
CAGE Code: D9182 		NAS-1660-0360
Trelleborg Sealing Solutions Ltd
NSN: 5330-01-543-7793
CAGE Code: 64422
NAS 4117-649
National Aerospace Standards Com
NSN: 5999-01-408-0639
CAGE Code: 80205 		NAS 42
National Aerospace Standards Com
NSN: 5365-00-833-7476
CAGE Code: 80205

Top nsn Manufacturers

3g shielding specialties lp 101communications inc
259 holdings ltd 136963 canada inc
2101 llc 3m espana sa
2eme regiment du materiel 3 vets inc
5dt inc 3 com/us robotics
2 mb distribution 24 hour distributors
3d robotics llc 3m france
3s group inc

NAS1131 26 part number of National Aerospace Standards Com - Order Now!

Part Number : NAS1131 26 Manufacturer : National Aerospace Standards Com
NSN Number : 5305-01-504-3736 (5305015043736)
Item Name : Screw Close Tolerance CAGE Code : 80205
NIIN : 015043736
FSC CODE : 5305 Screws

Thank you for taking an interest in part number NAS1131 26, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015043736, part number NAS1131 26 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number NAS1131 26

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Characteristics Data of NSN 5305-01-504-3736, 5305015043736

MRCCriteriaCharacteristic
CQBCMinimum Tensile Strength160000 POUNDS PER SQUARE INCH
CMLPThread Quantity Per Inch32
AASAThread Length0.276 INCHES NOMINAL
SFTTSurface TreatmentCADMIUM OVERALL AND CHROMATE OVERALL
AASKHead StylePAN
AASLHead Diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
ABQZInternal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
ZZZKSpecification/Standard Data80205-NAS1131 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
AAJFThread DirectionRIGHT-HAND
ANEEGrip Length1.625 INCHES NOMINAL
AHYMNominal Thread Diameter0.138 INCHES
STDCSurface Treatment Document And ClassificationQQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
AASBFastener Length1.886 INCHES MINIMUM AND 1.916 INCHES MAXIMUM
THSDThread Series DesignatorUNJC
MRCDecoded RequirementClear Text Reply
AASUHead Height0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
AAURGrip Diameter0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM
MATTMaterialSTEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL
AAJDThread Class3A
MDCLMaterial Document And ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
Upload  

Frequently Asked Questions (FAQ): NAS1131 26 NSN Part

What Type of Item Is Part Number NAS1131 26?
  • Part Number NAS1131 26 is an "Screw Close Tolerance" manufactured by National Aerospace Standards Com Managed with the NSN 5305-01-504-3736. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number NAS1131 26?
  • Screw Close Tolerance To receive a competitive quote for items with the part number NAS1131 26, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80205 Important When Purchasing Part Number NAS1131 26?
  • CAGE Code 80205 signifies National Aerospace Standards Com Managed as the manufacturer of Part Number NAS1131 26, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-01-504-3736 Paired with Part Number NAS1131 26?
  • Part Number NAS1131 26 is the identification assigned to the item by National Aerospace Standards Com Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-01-504-3736 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up