| Part Number : NAS1580A5T10 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-521-4655 (5305015214655) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-521-4655 (015214655) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS1580A5T10, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015214655, part number NAS1580A5T10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1580A5T10 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-521-4655 (5305015214655) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 015214655 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1580A5T10, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015214655, part number NAS1580A5T10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-521-4655 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015214655 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1580A5T10 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | Nominal Thread Diameter | 0.312 INCHES |
| AASK | Head Style | FLAT COUNTERSUNK |
| ANEE | Grip Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| MRC | Decoded Requirement | Clear Text Reply |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| AASB | Fastener Length | 1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| AASA | Thread Length | 0.476 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| ZZZK | Specification/Standard Data | 80205 - NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASL | Head Diameter | 0.578 INCHES MINIMUM AND 0.633 INCHES MAXIMUM |
| STDC | Surface Treatment Document And Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRSQ | Countersink Angle | 100.0 DEGREES NOMINAL |
| THSD | Thread Series Designator | UNJF |
| CMLP | Thread Quantity Per Inch | 24 |
| AAUR | Grip Diameter | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| MATT | Material | STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MDCL | Material Document And Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS6415 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
